Solid Mahogany body right-handed PR Guitar Kit with Double Locking Tremolo, Quilted Maple Veneer. Full Specifications General Dexterity: Right-Handed Number of Strings: 6 Size: Full Size Build Difficulty: Advanced (8/10) Straightforward wiring with few connections to solder, but the quilted Maple veneer is thin and easy to sand through, so use a light touch at the edges Tremolo bridge requires careful setup for tuning stability Set-in neck has to be aligned and glued before finishing, which is the step that most affects intonation Body Material: Mahogany (1 pc) Type: Solid Cutaway: Double Binding: None Top Veneer: Quilted Maple (1-3mm in depth) Top Contour: Carved Neck Material: Mahogany Joint: Set-in Profile: C-shaped Truss Rod: Two-Way, Adjustable Scale Length: 628 mm / 24.75" Binding: None Fretboard Material: Rosewood (Engineered) Radius: 14" / 356mm Number of Frets: 24 Fret Wire: Stainless Steel Fret Size: Medium Jumbo Inlay Shape: Flock Inlay Material: Abalone Headstock Shape: Standard (as in product images) Binding: None Nut: Locking Nut Electronics Neck Pickup: Humbucker Bridge Pickup: Humbucker Controls: 1 Volume, 1 Tone, 3-Way Toggle Wiring: DIY (soldering required) Output Jack: Side jack Hardware Bridge: Double-Locking Tremolo Tuners: Chrome Sealed Pickguard: Black Knobs: Gold Cavity Covers: Black Strings: Steel Finish: Chrome What's in the Box Double-cutaway guitar body with quilted maple top (unfinished) Guitar neck with rosewood fretboard and abalone bird-silhouette inlays, locking nut fitted 6x chrome sealed tuners with bushings and washers 2x humbucker pickups with chrome covers and ivory mounting rings Chrome double-locking tremolo bridge 2x tremolo springs with spring claw and mounting screws Tremolo arm socket hardware and Allen wrench 2x gold dome knobs 2x potentiometers with nuts and washers 3-way toggle switch with ivory tip, nut and washers Black rear cavity cover with six string slots Black pickguard Black truss rod cover with screws Output jack with mounting hardware 2x chrome strap buttons with felt washers and screws Yellow and black hookup wire Coil of grey wire Black instrument cable Assorted mounting screws What You'll Need You will need to solder the electronics. Depending on the finish you choose, the tools below cover a standard build. For assembly: Phillips screwdriver, Allen wrench set For wiring: Soldering iron, solder, wire cutters For finishing: Sandpaper (220-600 grit), wood grain filler, primer, paint or stain, clear coat For setup: String winder, guitar tuner, Allen wrench for truss rod and saddle height adjustment No woodworking or routing required - all cavities, holes, and channels are pre-cut.
