Stage 3r - from race to trail300 HP pump gasThe stage 3r is the ''best bang for the buck'' kit for drag racing. This kit was made to be the ultimate drag machine while conserving the stock turbo.While this kit was mainly developed to be used in drag races it is also good to be run in the trails. This kit is affordable and all adjustable from the tip of your fingers for the greatest user-friendly experience.With its multiple adjustments of power ranging from 250hp to 300hp and its easy to adjust launch control, we assure you that you will have fun every time you go out on a race or in the trails.We made sure that for your long-distance trip you would have a better fuel economy than a stock machine. When doing some regular trail riding you can expect a better fuel economy due to the fact of the stock mapping being too conservative.To push it further, we also developed a fuel economy map to help you reach greater distance with peace of mind.This fuel economy map still maintains greater horsepower than stock.The precision efi knock system is included in all our reflash.Kit include: Stage3r Ecu Reflash Dash Reflash Precision EFI Air Intake Precision EFI Fuel upgraded system Map Sensor Please take note that this power package requires the addition of some adjustable ramps in the primary clutchRamp adjustment starting point For a stock spring and helix combination in good condition, to achieve the target RPM. Please note; a modified spring and helix combination affects the final result. Therefore, we cannot provide settings for every application. The test should be performed as follows: accelerate quickly but gradually to avoid track slippage. While accelerating, wait for the RPM to stabilize, then take an RPM reading. If the RPM is too high, add weight; if too low, reduce the weight. Note that surface conditions vary and affect RPM. - Target RPM: 9000 - Team Clutch : Adjustable Ramp Kit Dalton Qa2-76 set to a total of 78 g (use purple Loctite) -Adapt Clutch : Adjustable Ramp Kit Dalton Qa3-65 set to a total of 67 g (use purple Loctite) - A screw head flush with the top of the hole (at the heel) is the most common setting.
Related
Related
Related