The Eris Pro 4 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns - unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments. The Eris Pro 4 also delivers finely detailed transient response, and stunning dynamics that create a natural and less fatiguing listening experience. A 1-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 4.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 80 Watts of power allows the Eris Pro 4 to reach down to 50 Hz. Acoustic tuning controls let you configure the Eris Pro 4 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner. Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 4 monitors into any stereo or multi-channel system. Sold individually. Features Single point-source coaxial design for wider sweet spot and better phase alignment 4.5-inch woven composite low-frequency driver 1-inch, ultra-low mass, silk-dome, high frequency driver Crossover Frequency, 3.4 kHz 80W, Class AB amplification 50 Hz to 20 kHz frequency response 99 dB Peak SPL (@ 1 meter) Acoustic Tuning Controls: Acoustic Space (flat, -2, -4 dB) High Frequency (±6 dB, center 10 kHz, continuously variable) Mid Frequency (±6 dB, center 1 kHz, continuously variable) Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave) XLR and 1/4-inch TRS balanced rear inputs RCA unbalanced rear-panel input Provisions for wall and ceiling mounting (mounts sold separately) Protection: RF interference Output-current limiting Over-temperature Turn-on/off transient Subsonic filter Power Saver mode (engages after 40 minutes) Coaxial Speaker Design Coaxial speakers employ a HF driver placed in the middle of the LF driver for symmetrical response horizontally and vertically, increasing the sweet spot, clarity and imaging. Accurate transient reproduction. Consonant sounds in speech, percussion, and attack and decay of musical instruments are all transient signals. When reproduced accurately, the result is sonic transparency, definition, and intelligibility. With their excellent transient reproduction, Coaxial speakers minimize distortion and produce clean, clear, consistent audio at any SPL. Measurements Width 7.5" (19 cm) Height 9" (22.9 cm) Depth 8.6" (21.8 cm) Weight 9.5 lbs. (4.3 kg) Electronics Voltage Requirements 100-240 VAC, 50-60 Hz Connection Type IEC Hardware Cabinet Material Vinyl-Laminated, Medium-Density Fiberboard Monitors Protections RF InterferenceOutput-Current LimitingOver-TemperatureTurn-On/Off TransientSubsonic Filter Audio Switches Acoustic Space (Flat, -2 dB, -4 dB)Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave) Audio Controls VolumeHigh Frequency (±6 dB, center 10 kHz, continuously variable)Mid Frequency (±6 dB, center 1 kHz, continuously variable) Peak SPL 99 dB (@ 1 meter) Crossover Frequency 3.4 kHz Monitor Inputs 1- Balanced XLR, 1- Balanced ¼” TRS, 1- Unbalanced RCA HF Transducers 1” Ultra Low Mass, Silk Dome Tweeter (Coaxial) LF Transducers 4.5" Woven Glass Fiber Composite (Coaxial) Frequency Response 50 Hz - 20 kHz Input Impedance 10 kΩ Monitor Amplifier Power 80W Bi-Amped Specifications Input Impedance 10 kΩ
Related
Related