Product Overview Lincoln Pressure Primer This item ships free Lincoln's mounting accessories include an elevator (Model 1709) to facilitate drum change-over by lifting the pump from an empty drum and lowering it into a new drum with minimum effort. Primers and pressure primers are available for positive priming of viscous materials which are forced into the pump inlet by the downward force of the follower. Models are available for most applications from 5-gallon pails to 55-gallon drums. Key source specifications include For Drum Size Gal: 55 gal.; Model 1736; Operating Air Pressure: 40-50 psi/3-10 bar. Key Features For Drum Size Gal: 55 gal Operating Air Pressure: 40-50 psi/3-10 bar Lincoln Pressure Primer This item ships free Ideal For Choose this product if you need: Systems operating within the listed pressure specifications Product Details Review the product details below to confirm the for drum size gal, model / mpn, operating air pressure match your equipment or lubrication system. Shared Product Details Brand Lincoln Industrial Model / MPN 1736 Operating Air Pressure 40-50 psi/3-10 bar For Drum Size Gal 55 gal. Lowered In./Cm. 66-1/8/167.6 Raised In./Cm. 103"/261.6 Cm. Base Dimensions 24 x 36"/600 x 1000 mm Additional Product Information Lincoln's mounting accessories include an elevator (Model 1709) to facilitate drum change-over by lifting the pump from an empty drum and lowering it into a new drum with minimum effort. Primers and pressure primers are available for positive priming of viscous materials which are forced into the pump inlet by the downward force of the follower. Models are available for most applications from 5-gallon pails to 55-gallon drums. Models include followers with O-ring seals single O-rings for 5-gallon pail units and double O-rings for 55-gallon drum units) which seal the container of material from outside contamination and drying while wiping the container's sides clean. Pressure primers include a four-way valve which permits the air supply to be coupled to the unit at all times. Use of an air regulator and gauge is recommended. In order to prevent damage to pumps caused by operating after a drum is empty, a low-level air cut-off assembly is recommended. Frequently Asked Questions What model number should I verify? Confirm model or manufacturer part number 1736. What pressure is listed? The supplied specifications list 40-50 psi/3-10 bar.
