Pro Cleanse BC is a Multi-Surface Alkaline Cleaner / Premium Concrete Cleaner Premium Concrete Cleaner Removes Oil Stains Brushless Oxidation Removal Highly Concentrated Free-Rinsing Pro Cleanse BC is designed to deep clean multiple surfaces, including brick, limestone, granite, concrete, EIFS, vinyl siding, roofs, awnings and fiberglass. When used on exterior building surfaces, it will remove oxidation and other unwanted soils. Pro Cleanse BC is most effective as a building restoration cleaner and is often used as a secondary rinse to neutralize acid restoration cleaners. When used on concrete, Pro Cleanse BC will remove carbon, oil, tire and other stains. It will also brighten the concrete following removal of soils, giving a fresh restored look without the use of an acid component. Pro Cleanse BC does not mix with bleach. Do not allow product to dry on a hot surface. Water pretreatment is generally not necessary. Test a small surface prior to cleaning to determine compatibility before broad based use. Always test chemical in an "out-of-the-way" area. Allow surface to dry thoroughly before evaluating final appearance and results. For Brushless Cleaning: Use Pro Cleanse BC with two quick applications, which should lead to complete soil release. For brushless rinsing use no less than 1,000 psi. Craftsmanship determines the appropriate pressures for rinsing. When cleaning with pressure washers, set the metering valve at desired dilution rate, and apply cleaning solution from the bottom up on a dry surface. Always detail clean from the bottom up and rinse from the top down. Suggested Dilutions: Pro Cleanse BC does not mix with bleach. Do not allow product to dry on a hot surface. Water pretreatment is generally not necessary. Test a small surface prior to cleaning to determine compatibility before broad based use. Always test chemical in an “out-of-the-way” area. Allow surface to dry thoroughly before evaluating final appearance and results. For Brushless Cleaning: Use Pro Cleanse BC with two quick applications, which should lead to complete soil release. For brushless rinsing use no less than 1,000 psi. Craftsmanship determines the appropriate pressures for rinsing. When cleaning with pressure washers, set the metering valve at desired dilution rate, and apply cleaning solution from the bottom up on a dry surface. Always detail clean from the bottom up and rinse from the top down. Dilutions will vary based on the severity of the stain and type of surface. With hot water, product can be diluted further than with cold water. Heavy oil stains, stained wood – 1:1 to 1:2 Medium soil, lighter oil stains - 1:3 to 1:10 Light soil / general degreasing - 1:11 to 1:20 Coverage rates will vary from 100 - 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining. Pro Cleanse BC can be used with a pressure washer, brush or low-pressure sprayer application using either hot or cold water. Protect adjacent and surrounding surfaces not intended to be cleaned.
