The 6perspeX Turntable comes with Pro-Ject's carbon fibre 9cc Evolution tonearm, delivering a superb sound through its resonance-free Corean sub-chassis and magnetic-power assembly. This unit is backed up by a wealth of engineering advances including: A transparent acrylic plinth, which stands upon three individually height-adjustable Sorbothane-damped aluminium cones and carries the motor and the sub-chassis A quiet running AC motor with a two-step pulley to drive the platter's outside edge via a belt An inverted bearing with a stainless-steel axle to carry the ceramic ball on which the ceramic bearing plate runs A resonance-optimised platter in a sandwich construction, which utilises a fine-balanced medium density fibre platter Gold-plated phono sockets and earth screw An external power supply for avoiding potential electro-mechanical interference Pro-Ject's carbon fibre 9cc Evolution tonearm is included, which offers: A conical armtube for avoiding standing wave reflections An inverted tonearm bearing, which comprises four hardened stainless tips in ABEC7 spec ballraces Rings to provide extremely solid arm-bearing housings and avoid resonance Adjustable sorbothane-damped counterweight to counteract unwanted resonances Single-screw fixing of armtube for rotation for easy adjustment of needle azimuth Internal wiring consisting of high-purity copper from the headshell right through to the gold-plated phono sockets Pro-Ject's revolutionary decoupling concept and the masterful Evolution tonearm show an outstanding ability to push the limits of analogue audio one step further. Turntable • The transparent acrylic plinth stands on three individually height-adjustable Sorbothane®-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on tree magnetic fields. A supplied spirit level allows easy adjustment of the sub-chassis. • A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt. • The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs. • The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre platter weighing 2Kg and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp. • Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided. • External power supply avoids potential electro-mechanical interference. Tonearm 9cc Evolution • The headshell and armtube are fashioned from a single piece of carbon-fibre. • Conical armtube avoids standing wave reflections. • Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces. • Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances. • Sorbothane®-damped counterweight effectively counteracts unwanted resonances. • The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g • Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records. • Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle). • Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell. • Silicone-damped armlift can be adjusted to suit working height of the arm. • The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets. • High quality connection cable Pro-Ject Connect it Phono RCA-C supplied (123cm) Technical data Pro-Ject 6perspeX Nominal speeds 33 / 45 r.p.m. Dust cover yes Magnet supported sub-chassis yes Record clamp yes RCA phono sockets yes Sorbothane-damped aluminium cones yes Tonearm Pro-Ject 9cc Evolution Carbon-fibre headshell and armtube yes Effective tonearm length 9 " (230mm) Effective tonearm mass 8g Overhang 18mm Supplied counterweights cartridge weights 5 - 7,5g, 7 - 10g, 9 - 11g and 10 - 14g Downforce range 10 - 35mN Speed variance ±0,5 % Wow and flutter ±0,06 % Signal to noise -73dB Platter weight/diameter 2kg/300mm Power supply type Mains-fed outboard power supply 220 - 240V, 50 cycles or 100 - 110V, 60 cycles Output voltage 16V/500mA AC Power consumption 2W Dimensions (lid open) 460 x 420 x 465mm Dimensions (lid closed) 460 x 183 x 365mm Weight 10,5kg Dimensions (W x H x D)
