Stylus replacement for the Pro-Ject Pick It MM E Moving Magnet Cartridge The new Pick it MM E The phono cartridge is one of the most sound-forming and sonically critical part of a turntable. It transforms the physical grooves of a record into an electrical signal. This signal determines the base quality of the music playback. Moving-Magnet (MM) cartridges are the most common and affordable solution. These can be manufactured less expensive compared to Moving-Coil (MC) and an additional advantage is the replaceable stylus. Our goal was to design a cartridge which delivers a high quality music playback while keeping the price as low as possible. The Pick it MM E is the perfect starting point for every budget vinyl lover. Ultimate price-performance ratio The Pick it MM E uses a low mass system which is realised with a miniature neodymium generator magnet. Due to the lower inertia the result is a clear improvement of tracking accuracy. The conical diamond tip delivers a warm and smooth high quality audio reproduction with low background noise. The enclosure is made of resonance optimised ABS which results in a total weight of around 5,5 grams. The highly damped body effectively reduces mechanical vibration induced colourations to a vanishing level. Technical Specifications Cartridge principle: MM (Moving-Magnet) Output voltage at 1 kHz: 3,8 mV (3,54 cm/sec) Tracking ability at 315Hz: 70 μm Dynamic compliance: 14 μm/mN Frequency response: 10 - 20 000 Hz +/- 2dB Stylus type: Conical Tracking force, range: 1,8 - 2,2 g (mN) Tracking force, recommended: 2,0 g (mN) Height stylus tip to top mounting surface: 18,2 mm Tracking angle: 23° Recommended load resistance: 47 kΩ Cartridge weight: 5.5 g
Related
Related
Related
Related