The Pro-Ject X8 Evolution is a high-mass belt-drive turntable available at Vinyl Sound, an authorized Pro-Ject dealer in Toronto, Canada. Adapted from the Xtension 9 and 10 platform, the X8 Evolution combines a precision-balanced 5.1kg TPE-damped aluminum platter on an inverted ceramic ball bearing with magnetic support, a heavy MDF chassis on height-adjustable TPE-damped aluminum feet, and a 9cc EVO 9-inch one-piece carbon-fiber tonearm. Electronic speed change covers 33 and 45rpm, and a balanced 5-pin DIN phono output ships with a DIN-to-RCA cable for immediate unbalanced use. Browse the full Pro-Ject turntable lineup at Vinyl Sound. Platter, Bearing, and Chassis The X8 Evolution's platter is machined from a single piece of aluminum and damped with a TPE insert, minimizing self-resonance across the audio band. It rotates on an inverted bearing with ceramic ball and PTFE thrust pad. An opposing neodymium magnet repels the platter from the plinth, reducing the effective load on the bearing and ensuring quiet, low-friction operation over the long term. The MDF chassis sits on custom feet CNC machined from aluminum, fully height-adjustable, and damped with TPE to decouple the table from both structural and airborne vibration. The combination of mass and multi-point TPE damping provides a stable, self-aligned platform that does not require ongoing adjustment. True Balanced Output The X8 Evolution is configured for balanced phono operation via its 5-pin DIN output. To run balanced you need: (a) a moving coil cartridge, (b) a phono stage with balanced inputs, and (c) a DIN-to-XLR or DIN-to-mini-XLR phono cable. In balanced mode, common-mode noise introduced along the cable run is cancelled at the phono stage input, lowering the noise floor and improving channel separation compared to unbalanced RCA operation. The table ships with a DIN-to-RCA Connect it E cable (1.23m) for out-of-box compatibility; balanced cables and phono stages are sold separately. 9cc EVO Tonearm and Upgrade Options The X8 Evolution ships with the 9cc EVO, a 9-inch one-piece carbon-fiber tonearm with inverted cardanic bearings: four stainless steel tips mounted in ABEC 7 quality ball bearings in a C-section geometry to minimize tonearm resonances. The conical armtube is formed from a single piece of carbon fiber to eliminate headshell junction problems, and the internal wire loom runs uninterrupted from cartridge to the 5-pin DIN output. The 9cc CA Premium is available as a drop-in upgrade (no soldering needed), adding a carbon/aluminum armtube, high-purity silver wiring, upgraded stainless-steel bearings, and a TPE-damped counterweight on a threaded stub. The EVO AS and EVO AS Premium offer curved geometry with interchangeable headshells for cartridge collectors. Key Features 15kg high-mass belt-drive turntable Heavy MDF chassis with CNC-machined aluminum feet — fully height-adjustable, TPE-damped Precision-balanced 5.1kg single-piece aluminum platter with TPE damping insert Inverted ceramic ball bearing with PTFE thrust pad and opposing neodymium magnetic support Pro-Ject 9cc EVO 9-inch one-piece carbon-fiber tonearm Inverted cardanic bearings — 4x stainless steel tips in ABEC 7 ball bearings Uninterrupted tonearm wire loom from cartridge to 5-pin DIN output Drop-in tonearm upgrade compatibility (9cc CA Premium, EVO AS, EVO AS Premium) Electronic speed change: 33 / 45 rpm Balanced 5-pin DIN phono output — ships with DIN-to-RCA Connect it E (1.23m) Dustcover, 45rpm adapter, and felt mat included Available in satin walnut, gloss black, and gloss white Handmade in Europe Technical Specifications Speeds 33 / 45 rpm (electronic speed change) Drive Belt drive Platter 5.1 kg, lathed aluminum with TPE damping insert Platter bearing Inverted ceramic ball, PTFE thrust pad, neodymium magnetic support Speed drift 33rpm: ±0.11%; 45rpm: ±0.09% Wow & flutter 33rpm: ±0.11%; 45rpm: ±0.10% Rumble 73 dB Tonearm 9cc EVO, 9", one-piece carbon fiber Effective arm length 230 mm Effective arm mass 8.5 g Overhang 18 mm Phono output Balanced 5-pin DIN (ships with DIN-to-RCA, 1.23m) Isolation feet CNC aluminum, height-adjustable, TPE-damped Included Dustcover, 45rpm adapter, felt mat Power supply 15V / 0.8A DC Power consumption 5W (0.3W standby) Dimensions — lid closed (W x H x D) 465 x 150 x 350 mm Dimensions — lid open (W x H x D) 465 x 415 x 420 mm Weight 15 kg (33.07 lbs) Finishes Satin walnut / gloss black / gloss white Origin Handmade in Europe Frequently Asked Questions How does the Pro-Ject X8 Evolution compare to the Xtension 9 Evolution? Both share the same 9cc EVO tonearm and balanced 5-pin DIN output, but the platforms differ meaningfully. The Xtension 9 uses a mass-loaded, magnetically suspended sub-chassis with steel-pellet plinth filling and a heavier sandwich platter. The X8 Evolution uses a non-suspended approach: a heavy MDF chassis with TPE-damped aluminum feet and a single-piece TPE-damped aluminum platter on a neodymium-assisted inverted bearing. The X8 is more compact and easier to set up; the Xtension 9 provides a higher level of mechanical isolation. Both are available at Vinyl Sound in Toronto, Canada. Does the Pro-Ject X8 Evolution come with a cartridge? No. The X8 Evolution is sold without a cartridge. The 9cc EVO's 8.5g effective arm mass suits medium-to-high compliance cartridges in the MC and MM categories. Contact Vinyl Sound in Toronto, Canada for a cartridge recommendation matched to your phono stage and musical priorities. What cartridges work best with the Pro-Ject 9cc EVO tonearm? The 9cc EVO has an effective mass of 8.5g, making it a medium-low mass arm that pairs well with medium-to-high compliance cartridges (12–25µm/mN). Compatible brands include Ortofon, Sumiko, Audio-Technica, and Goldring at the MM level, and Ortofon Quintet, Benz Micro Glider, and similar at the MC level. Browse cartridges at Vinyl Sound, or contact Vinyl Sound in Toronto, Canada for specific pairing advice. Which accessories would enhance listening on the Pro-Ject X8 Evolution? The X8 Evolution ships with a felt mat, 45rpm adapter, and DIN-to-RCA phono cable — a complete out-of-box setup for unbalanced use. The most impactful upgrades are: (1) a well-matched cartridge for the 9cc EVO's 8.5g effective mass; (2) a DIN-to-XLR balanced phono cable to unlock the table's balanced output; and (3) a phono stage with balanced inputs and adjustable MC loading. A tonearm upgrade to the 9cc CA Premium (carbon/aluminum tube, silver wiring, upgraded bearings) is also available as a drop-in. Contact Vinyl Sound in Toronto, Canada for a system-matched accessories recommendation. What phono stage should I pair with the Pro-Ject X8 Evolution? The X8 Evolution's balanced DIN output and 73dB rumble figure suit a phono stage with balanced XLR inputs, low noise floor, and adjustable MC loading. Browse phono preamplifiers at Vinyl Sound. Contact Vinyl Sound in Toronto, Canada to discuss phono stage pairing based on your cartridge and system budget. Can I upgrade the tonearm on the Pro-Ject X8 Evolution? Yes. The X8 Evolution accepts drop-in tonearm upgrades without soldering. The 9cc CA Premium is the primary step-up, adding a carbon/aluminum armtube, high-purity silver internal wiring, an upgraded stainless-steel bearing assembly, and a TPE-damped threaded counterweight. The EVO AS and EVO AS Premium offer curved-arm geometry with interchangeable headshells. Contact Vinyl Sound in Toronto, Canada to confirm current upgrade availability. Where to buy the Pro-Ject X8 Evolution in Toronto, Canada? The Pro-Ject X8 Evolution is available at Vinyl Sound, an authorized Pro-Ject dealer in Toronto, Canada. Contact Vinyl Sound to confirm current stock and available finish options before ordering.
