{tab Overview} PRO3000 ANALOG TONE & PROBE KIT - FLUKE NETWORKS The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology. Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks.The large loud speaker on the network probeallows you to hear through drywall, wood or other enclosuresto find wires quickly and easily. You can send this loud tone up to 10 miles (16 kilometers) on most cables! Attach the nylon pouch to your belt, and you will beequipped for any wire identification job. Tone and trace wire on non-active networks SmartToneTM technology provides five distinct tones for exact pair identification Sends loud tone up to 10 miles (16 kilometers) on mostcables Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures Angled bed-of-nails clips allow easy access to individual pairs RJ-11 connector is ideal for use on telephone jacks Attach nylon pouch (included in kit) to your belt for easy transport {tab Specs} Specifications Pro3000 Analog Toner Specifications User interface Slide switch selects Continuity orTone ModePush button switch selects SOLID, ALT or OFFTone mode LEDContinuity/Polarity LED Solid Frequency 1000 Hz nominal Alternating Frequency 1000/1500 Hz nominal Over Voltage Protection 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode 8 dbm into 600 ohms Output Voltage Level in Continuity Mode 8 Vdc with fresh battery Battery 9V alkaline Temperature Operating: -20° C to 60° C, Storage: -40° C to 70° C Case dimensions 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) Pro3000 Analog Probe Specifications User interface ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack Battery 9V alkaline Temperature Operating: -20? C to 60? C, Storage: -40? C to 70? C Case dimensions 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) Pro3000 Analog Toner Specifications User interface Slide switch selects Continuity orTone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED Solid Frequency 1000 Hz nominal Alternating Frequency 1000/1500 Hz nominal Over Voltage Protection 60 Vdc in Toner/Polarity Mode Output Power in Tone Mode 8 dbm into 600 ohms Output Voltage Level in Continuity Mode 8 Vdc with fresh battery Battery 9V alkaline Temperature Operating: -20? C to 60? C, Storage: -40? C to 70? C Case dimensions 2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm) Pro3000 Analog Probe Specifications User interface ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack Battery 9V alkaline Temperature Operating: -20? C to 60? C, Storage: -40? C to 70? C Case dimensions 9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm) {/tabs}
Related
Related
Related
Related