A new high end stand mounting loudspeaker at an affordable price. Better efficiency and a rich sound belies their size. The Response DB3 has a similar cabinet size to the Response DB1. There are structural and visual differences to the cabinet of the Response DB3, it also employs a new bass driver and crossover which have been chosen for their exceptional performance with a more affordable price. The Response DB3 has a wonderfully rich and extended bass quality, loaded with a single reflex port in the rear of the cabinet. The tweeter is our ProAc one inch soft dome used in many other ProAc designs. This one inch silk dome has a superbly flat response with electrostatic type detail and sweetness to its qualities. A newly designed bass driver with a special surround and dust cap, allows extra information from the voice coil giving a smoother transition of frequencies to our one inch dome tweeter. The bass driver is a long throw design with a raised spider and linear motor system. The new bass driver is responsible for the remarkable bass extension. Specifications Nominal Impedance: 8 ohms Recommended Amplifiers: 20 to 100 watts Frequency Response: 38Hz to 30kHz Sensitivity: 88.5 dB linear for 1 watt at 1 metre Bass/Midrange: ProAc 5" long-throw unit with mikapulp cone and transparent dust cap Tweeter: ProAc 1" silk dome with special coolant Crossover: Finest components on dedicated circuit board; multistrand oxygen-free copper cable throughout; split for optional bi-wiring or bi-amplification Dimensions: 12.5" (320mm) high, 7.28" (182mm) wide, 10.4" (280mm) deep Weight: 19.6 lbs (8.8kg) each Mode: Stand-mounted Grille: Acoustically transparent crimplene Finish: Standard Finishes: Black Ash, Mahogany, Cherry, Maple, Oak, Silk White Premium Finishes: Rosewood, Ebony Premium finishes to order at extra cost
