Pro-Ject T1 EVO BT Turntable 黑膠唱盤 所有經本公司出售之 Project 均為行貨產品 本產品享有1年保養及免費送貨服務(只限香港地區） 歡迎致電 3902 3606 查詢 Pro-Ject T1 EVO 奧地利名廠 Pro-Ject 出品, 質量有保證 採用皮帶驅動， 備有33/45轉電子轉速控制器 Ortofon OM10 唱頭，8.6英寸高精度低自重鋁質唱臂，精確 CNC 切割高自重底盤，低摩擦抗震唱臂軸承 全新切換線性輸出/唱頭輸出 抗諧振子轉盤設計，8毫米高自重無諧振磨砂玻璃盤Platter Pro-Ject Audio System 獨家設計超高遮罩低電容值半對稱結構唱頭線 The T1 EVO Series adds the classic Ortofon OM 10 phono cartridge, a larger ‘Debut-sized’ sub-platter as well as electronic speed change for all models. T1 EVO BT has a built-in MM phono preamp that also sends a Bluetooth signal to stream your vinyl wirelessly! Built-in moving magnet phono preamp (switchable!) Electronic speed change Pre-adjusted Ortofon OM10 cartridge Larger anti-resonant sub-platter (Debut-sized) Heavy 8mm-thick low-resonance glass platter CNC-machined chassis (no resonant hollow spaces!) 8.6″ one-piece aluminum tonearm Low-friction, vibration-free tonearm bearing Low-capacitance Connect it Phono E RCA cables Vibration-absorbing isolation feet Elegant dust cover with adjustable hinges Available in gloss black, satin white & satin walnut laminates Handmade in Europe T1 EVO – Your Introduction to High-Fidelity The T1 EVO aims to deliver true high-fidelity sonics for vinyl enthusiasts on a limited budget. Boasting premium materials, stylish aesthetics and rich, lively sound quality, our extensive development process has ensured no compromise to sonics in the design & build of T1 EVO. The stylish CNC-machined plinth (available in gloss black, satin white or satin walnut laminates) uses no plastic and is carefully manufactured to eliminate resonant hollow spaces that would otherwise detract from sound quality. ‘Sound-first’ principles are implemented throughout. The glass platter is heavy and non-resonant, again avoiding the flaws of plastic and cheap steel alternatives. Additionally, the purpose-selected turntable feet are highly effective in isolating the T1 EVO from ambient vibrations in the vicinity of your hi-fi system. Audiophile Implements T1 EVO’s motor drives a belt attached to a larger sub-platter (Debut-sized!) which rotates in a bearing assembly machined to tolerances within 0.001mm. It’s comprised of a stainless steel spindle in brass bushing. All told, the T1 EVO drive system ensures stable & accurate platter speeds with non-resonant behavior, allowing the tonearm & cartridge to perform their very best. The tonearm is an 8.6″ one-piece aluminum design, meaning the headshell and armtube are integrated for the sake of rigidity & resonance control. High-quality bearings allow for silent & frictionless motion of the tonearm. Supplied with an Ortofon OM 10 moving magnet cartridge featuring an elliptical diamond stylus tip, this is a true hi-fi playback system with no corners cut! The cartridge is aligned, tracking force is set at the factory and anti-skating is built-in, sparing you the trickiest parts of turntable setup so that you can be spinning vinyl in mere minutes. 唱放 Phono preamp 內置 Included 唱頭 Cartridges Ortofon OM10 轉速 Speed 33 / 45 RPM 驅動原理 Drive principle 皮帶，全自動 belt drive, fully automatic 砧板 Platter 8mm 磨砂玻璃連軟墊Heavy 8mm blasted-glass platter with felt mat 訊噪比 Signal to noise 65dB 唱臂 Tonearm 8.6吋 鋁製唱臂 8.6” one-piece aluminium 附送配件 Included accessories 火牛、防塵蓋、砧板墊、Connect it E接線 power supply, dust cover, feltmat, Connect it E 尺寸 Dimensions 415×100×335 mm (W×H×D) 重量 Weight 淨重 3.8kg net
