Brand: Hunter Industries SKU: PROS12PRS30CV Product Overview The Hunter PROS-12-PRS30-CV is a 12-inch pop-up sprinkler body with an in-stem regulator set to approximately 30 PSI and a factory-installed drain check valve. The Big Frog Supply SKU is stored as PROS12PRS30CV. Its tall riser provides clearance over shrubs, groundcover, and taller plant material, while the regulated outlet pressure supports compatible female-threaded fixed, adjustable, and specialty spray nozzles. The watering nozzle is sold separately. The brown cap identifies the PRS30 configuration. The factory check valve helps hold water in the lateral line for elevation differences up to approximately 14 feet, reducing low-head drainage, puddling, and water discharge after the irrigation zone shuts off. The body also includes a co-molded wiper seal, heavy-duty retraction spring, ratcheting riser, and directional flush plug. Key Features 12-inch pop-up sprinkler body Pressure regulated to approximately 30 PSI Factory-installed drain check valve Check-valve capacity up to approximately 14 feet of elevation Operational inlet-pressure range of 15 to 100 PSI 1/2-inch female-threaded bottom inlet No-side-inlet configuration Brown PRS30 identification cap No watering nozzle included Common Uses Sloped shrub beds and planting areas Locations requiring 12 inches of pop-up clearance Conventional spray-nozzle zones requiring 30 PSI regulation Systems with low-head drainage concerns Compatibility and Installation Notes Select a compatible female-threaded spray nozzle separately. Connect to a compatible 1/2-inch threaded swing joint or fitting. Install vertically with the cap level with finished grade and adequate clearance for the long riser. This is the no-side-inlet model. Confirm available inlet pressure is sufficient for the regulator, nozzle flow, and system losses. Frequently Asked Questions Does PROS12PRS30CV include a nozzle? No. It includes the regulated sprinkler body and factory check valve. The watering nozzle is selected separately. How much elevation can the check valve hold? Hunter rates the check-valve option for up to approximately 14 feet of elevation on 12-inch PRS30 models. Does it have a side inlet? No. This is the no-side-inlet configuration. Why Buy from Big Frog Supply? Big Frog Supply carries Hunter PRS30 sprinkler bodies, spray nozzles, check-valve models, swing joints, and irrigation repair components.
Related
Related
Related
Related