Koch-Chemie Protector Wax “Pw” is a quick, professional protection step that boosts gloss and adds water-beading slickness for easier maintenance. It’s ideal for topping up between full details. Best for Fast protection after washing Boosting gloss and hydrophobic behavior Maintaining existing wax, sealant, or coated vehicles How to use Work on cool paint in the shade. Dilute it — Protector Wax is a concentrate, not a ready-to-use spray. Mix roughly 30 ml per 1 litre of water (about 1:33) for a foam sprayer or pump sprayer, or 1:30–1:50 in a foam cannon. Apply the diluted solution to the clean, still-wet vehicle and let it dwell 1–3 minutes. Rinse it off thoroughly with a pressure washer to avoid staining, then dry any residual water. Use minimal product and rotate towels often for the cleanest result. Pro tips Mix only what you need for one application — do not store diluted product. Work panel by panel and rinse before the product dries on the surface. Protection builds with regular use rather than from a single heavy application. ⚠️ Safety: The concentrate is classified as causing severe skin burns and eye damage (H314/H318) and is harmful if inhaled (H332). Wear protective gloves and eye/face protection, do not breathe the vapour or spray, and keep it out of reach of children. FAQ How long does it last? Longevity depends on conditions and washing habits. It’s designed for maintenance and easy reapplication. Can I use it on coated cars? Yes, it’s commonly used as a topper for protected finishes when applied lightly and buffed clean. Is it safe on all paint types? It’s intended for automotive paint systems when used as directed. Test on a small area if unsure.
