The OSEPP IR Proximity Sensor Module measures distances. It utilizes the Sharp GP2Y0D805Z0F measuring sensor unit which is composed of an integrated combination of photo diode, infrared emitting diode and a signal processor. The digital value from the proximity sensor is read out on the I²C bus.The module uses the I²C interface for data communication. The I²C lines are packaged with the power and ground lines into a modular connector, which allows easy plug and play operation. There are two connectors on the module to enable daisy chaining of multiple I²C devices together. Supports I²C interfacing with 4 programmable 7-bit address (0x20, 0x22, 0x24, 0x26) to allow up to 4 OSEPP IR Proximity Sensor module to exist on the same I²C bus.This sensor module is ideal for designs that need to detect objects within a certain range or designs that need to avoid obstacles. It can also be used as a touchless switch. 100% Arduino compatible. Compatible with the OSEPP I²C Expansion Shield. Detection range of 0.5 to 5cm. Provides 0.1” breakout points for power and I²C interface pins access. Provides pass-through connector to support daisy chaining of multiple sensors from the OSEPP Sensor Module family. Specifications Catalog No. 2760467 Mfg. Part No. PROX-01 I²C Addresses (7-Bit) 0x20, 0x22, 0x24, 0x26 Form Factor 23mm × 36mm Power Consumption 475mW UPC 899262000121 Technical Schematic (PDF)⚠️ WARNING: CHOKING HAZARD: Small parts. Not for children under 3 yrs.
