The Proximity reader with Genuine HID Technology is for use with the Net2 or 3rd party access control systems. These readers work with standard cards with Genuine HID Technology™, operating at 125 kHz. The Wiegand card data is transmitted un-shortened. The reader range includes the Proximity P50M reader with Genuine HID Technology™ and the Proximity metal reader with Genuine HID Technology™. These readers are pre-activated with 125kHz out of the box. There is no need to purchase an activation license to use this technology. Wiegand output is available with a separate purchase of an activation card. The P series readers are supplied with black fascias only. Replacement fascias are available in black and white/gray, and are free of charge to Paxton registered installers from the Extranet. Installation– The Proximity readers come with 3m of cable and can be wired as shown on the control unit label. Be sure to avoid mounting on metal surfaces or near other proximity readers as this will affect the read range. The cable exits centrally from the back of the reader making drilling and mounting very accurate. Operation– A token is read by holding it within close vicinity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. When access is granted the green LED flashes, if access is denied the red LED flashes. Proximity Reader With HID Technology Main Features Use with the Net2 access control system Wiegand output (available via an activation license) Reads HID™ 125 kHz proximity ISO-Compliant cards Includes 3m cable IPX7 rated - suitable for outdoor use Available as Proximity P50M or Proximity metal reader
