Description The ESP PTZ Camera 3D Joystick Controller is a desktop control unit designed for operating PTZ (pan-tilt-zoom) security cameras remotely. A 3D joystick allows smooth directional control of the camera head, while dedicated zoom and preset buttons on the keypad provide quick access to saved camera positions. An integrated LCD display shows connection status, current camera ID and stored preset information. Used in control rooms, reception desks and security monitoring stations where multiple PTZ cameras need to be operated from a single location. The controller connects to compatible PTZ cameras over RS-485 or network protocols depending on camera specification. The keypad allows programming of up to 255 preset positions per camera, with each preset storing pan, tilt and zoom coordinates that can be recalled with a single button press during live monitoring. The controller weighs 1.3kg and measures approximately 360mm wide by 200mm deep, giving it enough mass to remain stable during joystick operation without sliding across a desk surface. The joystick mechanism provides variable-speed control — slight movements produce slow pan/tilt for precise framing, while full deflection produces rapid movement for tracking across larger areas. The keypad layout separates camera selection, preset control and menu navigation into distinct zones to reduce operator error during use. Specification Operating Voltage 12V DC Baud Rate 1200, 2400, 4800, 9600, 19200bps Outputs BNC, Audio Communication Protocol Pelco-P, Pelco-D, Panasonic, HikVision, Samsung, RULE, Dahua, SAE Dimensions 420 x 260 x 170mm Product Gross Weight 1.30KG Downloads Product Specification Sheet Product Manual Frequently Asked What cameras is this compatible with? The controller works with PTZ cameras that support RS-485 or network control protocols. Compatibility depends on the specific camera model and protocol it uses. Refer to the Product Manual in the Downloads tab for a list of supported protocols and camera brands, or contact us with your camera model for confirmation before purchase. How many preset positions can be stored? The controller supports up to 255 preset positions per camera. Each preset stores the pan, tilt and zoom coordinates, allowing you to recall saved camera positions instantly during monitoring. Does it control multiple cameras? Yes. The keypad includes camera selection buttons that allow you to switch between multiple PTZ cameras connected to the same control network. Each camera must be assigned a unique ID during initial setup. What powers the controller? Power requirements are detailed in the Product Specification Sheet in the Downloads tab. Most ESP PTZ controllers use either 12V DC or PoE (Power over Ethernet) depending on the connection method to the camera system.
Related
Related
Related
Related