🛠️ PwnCNC Spindle Kit Powerful, Reliable, and Built for Your CNC Workflow PwnCNC's Spindle Kits are precision-selected collections of components engineered to deliver reliable spindle performance for a wide range of CNC machines. Whether you're retrofitting an older setup or upgrading a new machine, this kit gives you all the essentials for a solid, capable spindle system—with compatibility and flexibility at the core. ❓ Have questions about compatibility?Read our Spindle Compatibility FAQ for answers about Onefinity, Shapeoko, and more. 📚Comparing Spindle Kits and Systems?This is a budget-friendly spindle kit. If you're looking for better quality checkout our Spindle Systems. See the differences in our comparison chart. 💡 Looking for a plug-and-play solution? Check out our fully enclosed Spindle System, which includes this kit preassembled with an integrated VFD enclosure—ready to install. 🕒 Build Time & Availability (Please Read) PwnCNC Spindle Kits are assembled and tested in-house before shipment. While we keep many components in stock, each system is built and configured based on your selections (motor size, voltage, controller type, etc.). Because of this, systems are not pre-built shelf inventory. Typical Lead Time: Most Spindle Kits ship within 1–2 weeks. However, depending on motor availability or current order volume, lead time can extend to up to 4–6 weeks. If your build timeline is critical, we recommend contacting us before ordering to confirm current availability. ✅ What’s Included: 🔌 VFD + Keypad PwnCNC 110V or 220V VFD (Pre-programmed for CW/CCW, PWM/Modbus control, quiet fan mode) Detachable keypad with dial speedometer for manual control US Power Cord (NEMA 5-15P for 110V or L6-20P for 220V) 🌀 Spindle Motor (Choose Your Configuration): 1.5kW, 110V, 65mm, ER11 – Air or Water Cooled 1.5kW, 110V, 80mm, ER20 – Air or Water Cooled 2.2kW, 220V, 80mm, ER20 – Air or Water Cooled ⚙️ Need something specific? We offer special-order motors too (lead time: 4–8 weeks) 🔗 Spindle Cable 20' pre-crimped shielded non-bonded/highly-flexible spindle cable that you're expected to properly drain to ground on the VFD side. 🔩 Collets & Wrenches (3) Collets matched to spindle size: • ER11: 1/16", 1/8", 1/4" • ER20: 1/8", 1/4", 1/2" (2) Wrenches for collet and shaft • ER11: 13mm & 17mm • ER20: 21mm & 30mm 💧 Cooling System (Water-Cooled Models Only) 110V (US) or 220V (Int'l) Pond Pump 40' Superthane Ether Tubing * This tubing is oversized for the stock nuts on the motors. You will need to do minor modifications to the tubing to make them fit. Alternatively you might consider adding our exclusive Kool Connectors for a more premium fit. 🚫 What’s Not Included: Control Cable to your CNC controller (available separately based on your machine model) Keypad Mount & Extension Cable (for relocating the VFD keypad) Coolant Liquid & Reservoir (use a 4-gallon bucket & coolant mix like antifreeze + distilled water) VFD Enclosure, it is recommended within the included manual that you enclose the VFD within an enclosure for safety. This is something you're expected to do during proper installation. ⚙️ Technical Highlights: ER11 collets used on 65mm motors | ER20 on 80mm 1.5kW motors draw 12A @ 110V | 2.2kW draws 10A @ 220V Operating range: 8,000 – 24,000 RPM Fully G-code controllable (PWM or Modbus) “Quiet Mode” reduces noise with smart fan control Fully assembled, tested, and ready to install (minimal wiring required) 💬 Important Notes: This is a configurable bundle—based on your answers to the dropdowns above, individual components will be automatically added to your cart. If you remove items from the cart manually, they will not ship, regardless of your selections. 🔁 Compatible with most CNC machines, including Onefinity.⚠️ Some controller-specific items (like control cable or keypad mount) may be required depending on your setup. 🔧 Looking for More? Upgrade your setup with our Spindle System for a great plug-and-play experience, or explore even more advanced options like our ATC System when you're ready to take your CNC capabilities to the next level. 📘 Spindle Kit Documentation Let me know if you'd like a short version for thumbnail display or a version optimized for social promotion. The stock Superthane material we sell is 10mm OD and thus may take some massaging to fit through the standard compression nuts on top of the water-cooled spindles.
