Gyeon Q²M Total Remover Q²M TotalRemover is an efficient coating and sealant remover designed to remove protection from exterior vehicle surfaces without harming them—including sealants, old coatings, factory waxes, and similar layers. It’s ideal for preparing factory-fresh cars before coating or for removing old coatings without the need for extensive polishing. What It Removes Sealants Old coatings Factory waxes Why Use TotalRemover Before Coating Q²M TotalRemover helps chemically degrade existing protection so you can apply a new layer or any protection product of your choice without jeopardising proper surface bonding on paintwork. It’s also described as extremely handy for matte paint jobs or cured high spots on delicate substrates. Best Practice & Pro Tips Use on clean, wet paintwork (recommended during the preparation wash). Spray liberally on one panel at a time. For maximum efficiency, work the product with a dedicated mitt (example mentioned: Q²M SilkMitt EVO). Allow it to sit for 30 seconds, then rinse off the panel. How to Use Wash the vehicle and keep the surface clean & wet. Spray Q²M TotalRemover on one panel. Agitate with a dedicated wash mitt for better efficiency. Wait 30 seconds. Rinse thoroughly and continue panel by panel. Capacities Available Size Best For 500 ml Personal use / occasional decontamination & prep 1000 ml (1L) Frequent use / enthusiast & professional prep washes Quick Specs Product Type Efficient coating and sealant remover Primary Use Preparation wash to remove old protection and improve bonding Surface Condition Use on clean, wet paintwork Recommended Dwell Time 30 seconds (then rinse)
