QED Sample Pro 1.75" Bladder Pumps & Kits The Sample Pro portable pump combines the unparalleled sample accuracy and high reliability of a bladder pump in an easy-to-use design. It runs cool and can run dry without damage, and can be operated using any QED MicroPurge controller options - 12-volt integral compressor, a Honda-powered gasoline-driven compressor, an external compressed air cylinder, or a lightweight backpack with integral CO2 cylinder. The Sample Pro pump's reliability and low maintenance make it more economical to use. Its twist-open design makes it easy to change the disposable bladder in seconds. The compact 14.75” length fits in a bucket for easy cleaning between uses. The Sample Pro® Portable Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps. Pneumatic design can be operated with compressed air or compressed gas cylinder for complete portability. Key Specifications Low-flow sampling Disposable sampling bladder Stainless steel construction Quick, 1/4 turn tool-less disassembly Interchangeable push-to-lock tubing connection points Benefits Minimal turbidity and well surge during sample collection Easy to replace bladder or fast field cleaning Robust construction is resistant to most leachate and groundwater chemicals Fast and easy service for quick turn-around between sample wells Specifications MATERIALS Body, Inlet and Discharge Housing - 303 Stainless Steel Bladder - Polyethylene or Teflon O-Rings - Viton® or Buna-N (Viton standard. Specify Buna-N if needed for PFAS applications) DIMENSIONS Diameter - 1.75 in. (44.5 mm) Length - 14.75 in. (37.5 cm) w/ Push-In Fittings 16.5 in. (41.9 cm) w/ Compression Fittings 12.12 in. (30.8 cm) Bottom of pump to centerline of inlet Weight - 4.25 lbs. (1.93 kg) FITTINGS (Stainless Steel Compression or Push-In (Grab Plate) Type) Air - 1/4 in. (6.4 mm) OD x 3/16 in. (4.7 mm) ID Discharge - 3/8 in. (9.5 mm) OD x 1/4 in. (6.4 mm) ID or 1/4 in. (6.4 mm) OD x 3/16 (4.7 mm) ID Flow, Lift & Volume Maximum Lift - 250 ft. (76 m) Flow Rates - 3/8 in. OD Discharge Tubing, 10 ft. submergence: 1.6 Lpm @ 25 ft. 0.75 Lpm @ 100 ft. 1/4 in. OD Discharge Tubing, 10 ft. submergence: 1.25 Lpm @ 25 ft. 0.55 Lpm @ 100 ft. Pump Volume - 100 mL / 0.1 L / 0.026 gal. / 3.38 oz. Ordering Options Connection Type - Choose standard grab plate or compression fittings Bladder Type - Pumps accept polyethylene bladders and have an optional adapter for Teflon bladders Connection Size - The air inlet is standard for 1/4" outside diameter (OD) tubing. For the water discharge, choose between 1/4" OD & 3/8" OD. Consultants Kit w/ Grab Plate & Polyethylene Option - Includes pump and expendables to sample 10 wells. Housed in a rugged tool box, kit includes 10 each: polyethylene bladders, stainless steel (SS) grab plates, SS inlet screens, 0-ring sets, 5 SS check balls, cleaning brushes, portable well cap and a tubing cutter. Consultants Kit w/ Grab Plate & Teflon Option - Includes pump, Teflon cartridge conversion kit and expendables to sample 10 wells. Housed in a rugged tool box, kit includes 10 each: Teflon bladders, SS grab plates, SS inlet screens, o-ring sets, 5 Teflon check balls, cleaning brushes, portable well cap and a tubing cutter. Consultants Kit w/ Compression Fittings & Polyethylene Option - Includes pump and expendables to sample 10 wells. Housed in a rugged tool box, kit includes 10 each: polyethylene bladders, SS inlet screens, 0-ring sets, 5 Teflon check balls, 5 SS nut and ferrule sets, cleaning brushes, portable well cap and a tubing cutter. Consultants Kit w/ Compression Fittings & Teflon Bladder - Includes pump, Teflon cartridge conversion kit and expendables to sample 10 wells. Housed in a rugged tool box, kit includes 10 each: Teflon bladders, nut & ferrule sets, SS inlet screens, o-ring sets, 5 Teflon check balls, cleaning brushes, portable well cap and a tubing cutter.
