This is our dual Overdrive based on the AnalogMan version of the Blues Breaker, the King of Tone. This pedal have an onboard 18VDC charge pump (no need to wire it to a 18VDC outlet anymore), dual independent overdrive circuit with internal switch for Hard and Soft clipping of each channels. Internal trimpots for the presence control of each channels. You also have a dip switch for the High Gain mode on each side, inside the pedal. Enclosure is a 1590BB. Currently wired with 1n914, BA283 diodes and JRC4580 chip. Quick Note : This pedal ain't go a lot of volume, unity in boost mode is at full volume half gain, goof around from there. Power consumption : 21mA Voltage : 9Vdc Center Negative ONLY. Using more than 9V will blow some capacitors. Legacy : If your serial is after #4050, you have access to a dip switch, inside, for each side of the pedal, to get the "high gain" mode. All new units now have this feature.
