For applique: One side of this unique webbing is fusible and the other is sticky, making the applique movable. Reposition applique pieces as needed, fuse into place and add a favorite decorative stitch! Size: 20" X yardage *All Fabric/Fusible is cut to order in 1/4 yard increments. Directions: Trace, draw or print the design pieces onto the protective paper sheet of Appli-Stick. (Remember to use the reverse of the image if there is a defined right/wrong or left/right side, such as with lettering.) Trim around the image, leaving at least ¼" inch of the Appli-Stick outside the traced lines. Fuse Appli-Stick to the wrong side of decorative fabric, using a medium/high temperature on your iron (no steam) ands firm pressure. The fusible side of Appli-Stick is the soft/shiny side. Hold the iron in place for at least three seconds, then flip the piece over and press again on the fabric side. After the piece has cooled, cut out the appliqué precisely using the traced lines. Peel back the protective sheet to expose the sticky surface of the appliqué. Position the appliqué piece on the base fabric or garment - reposition as many times as needed! Once the desired positions of all pieces are in place, use your iron to press and set the bond. Use a medium / high iron temperature and hold the iron to the appliqué for at least three seconds. *Press on the appliqué side and the fabric side for maximum bonding. Finish by stitching around the appliqué with a satin stitch or your favorite decorative stitch.
