Description The Quad CCT is a 458mm square flush LED ceiling light with a layered geometric design built around two interlocking rectangular frames suspended above a larger square backplate. Integrated LEDs trace the edges of all three elements, casting light both outward as a halo and downward into the room. The fitting delivers 3200lm from a 50W integrated LED, with tuneable white colour temperature from 3000K warm white to 6000K daylight white, controlled via the supplied remote. Designed for rooms with ceiling heights below 2.4m where a pendant would hang too low, the Quad's 60mm profile sits tight to the ceiling and provides general illumination across living rooms, bedrooms, dining areas and open-plan spaces up to approximately 20m². The remote allows brightness adjustment and colour temperature shifts without needing a wall dimmer, making it practical for rooms where re-wiring is not wanted. The 120° beam angle spreads light evenly across the ceiling plane and down into the room. The white powder-coated metal frame gives a clean neutral appearance that pairs with both warm-toned and cool-toned interiors. The layered structure creates visual depth when viewed from an angle. The two inner rectangular frames sit proud of the backplate, giving the fitting a sculptural profile even when switched off. The LED strips behind the frames diffuse light through acrylic lenses, softening shadows and avoiding hard edges or glare points. The fitting weighs 3.5kg and mounts directly to a standard UK ceiling plate using the supplied fixings. The tuneable white function allows the same fitting to provide warm ambient light for evening use and cooler task light during the day, reducing the need for multiple fittings or additional floor lamps in multifunctional spaces. Specification Colour Finish 1 White Length 458mm Width 458mm Height 60mm Number Of Bulbs 1 Lamp Socket Integrated LED Colour Temperature 3000 - 6000K Tuneable White Beam Angle 120° Lumen 3200lm Power Consumption 50W Voltage 220-240V~50/60Hz Dimmable Yes - Remote Control Weight 3.5KG Warranty 3 Year Frequently Asked Is the Quad suitable for low ceilings? Yes. The 60mm profile makes it appropriate for rooms with ceiling heights below 2.4m where a pendant would hang too low. The flush mount sits tight to the ceiling and does not reduce headroom. How does the colour temperature adjustment work? The supplied remote control allows you to adjust the colour temperature between 3000K warm white and 6000K daylight white in incremental steps. The remote also controls brightness dimming. No wall dimmer or additional wiring is needed. What size room does it suit? With 3200lm output and a 120° beam angle, the Quad provides general illumination for rooms up to approximately 20m² (roughly 4.5m x 4.5m). Larger rooms may need multiple fittings or supplementary lighting. Can it be installed on a sloped ceiling? The Quad is designed for horizontal ceiling mounting only. Sloped or angled ceilings are not recommended as the fitting's weight distribution and mounting method assume a flat surface.
Related
Related