Current Lead Time ~ 4 weeks Please Watch This Full Install Instructional Video UPDATED KIT - This kit now includes the latest LED projectors. Performance and reliability is far superior to the last generations HID projectors. The LED projectors have no warm up time, no expensive bulbs to replace and far less parts. The 3rd Gen 4Runner Quad Projector Conversion Kit This kit fully transforms your 3rd Gen 4Runner headlight housings to hold two projectors per headlight, or four in total. This effectively DOUBLES the already insane amount of light provided by a traditional single projector retrofit (with a 35W Ballast). These projectors have a sharp cutoff line and will not blind oncoming drivers when properly aimed. New projector holders are made using a carbon fiber reinforced nylon. How it Works Before purchasing, please watch the full installation video tutorial for instructions on how to assemble this kit. This kit requires extensive modification to the headlight housing. If you do not feel comfortable with the DIY installation, we also sell fully built quad projector headlights! What's Included (4) Sanvi S8 2.5” LED Projectors 35W Each (4) LED Drivers (1) SBC Driver side drill alignment fixture (1) SBC Passenger side drill alignment fixture (1) SBC Driver side dual projector holder (1) SBC Passenger side dual projector holder (1) H4 Splitter (2) Wire Harnesses (4) Mini Gatling Gun Shrouds (16) Screws (1) SBC LED Projector tightening tool Tools and supplies Needed Drill and 2.75" hole saw attachment Dremel or other cutting device Phillips and flathead screwdriver Oven or heat gun (for baking the headlights open) 10mm and 12mm sockets Spray Paint and Primer (if painting housings) Sandpaper or steel wool (if painting housings) Needle Nose Pliers JB Weld or preferred adhesive (professional sized or large - approx $20) Use new DEPO 3rd Gen 4Runner headlight housings ONLY. These have a glass front lens. Disclaimer and Important Info This kit has ONLY been designed around the included 2.5” LED Projectors. It will NOT fit any 3.0" projector. Carbon fiber reinforced projectors holders will have small imperfections on the surface. This is due to the nature of the material and will not affect structural integrity. All sales are final. Returns are not accepted for this item. If you mess up a part during installation, we will gladly help you replace the part! Please refer to your local laws on the legality of modifying your headlights. Off-road use only.
Related
Related
Related
Related