Quick Clamps take the hassle out of mounting your AGM Jack (Electric Jack PRO, Manual Jack PRO or Manual Jack Sport) - or any gear from 1" to 2.5" in diameter - to a chassis tube. They install in minutes with no welding required, auto-adjust to remove slack, and lock down tight with a simple click of the ratchet. Simple, secure, and space-saving - so you can focus on the adventure, not your gear. NOTE: YOU NEED 2 IF YOU ARE PURCHASING TO MOUNT AN AGM JACK. Factory UTV roll cage reference Can-Am: X3- 1.875 inch Quick Clamp (Main roll cage running tubes front to rear and b-pillar cross bar - 1.860 inch actual.) Maverick-R- 1.875 inch Quick Clamp (Main roll cage running tubes front to rear and b-pillar cross bar - 1.860 inch actual.) or 2.0 inch Quick Clamps if you would like to clamp on the cross bar at the rear roof. Honda: Talon- 2.0 inch Quick Clamp (Main roll cage tubes running front to rear - 2.01 inch actual.) Kawasaki: Teryx KRX- 1.750 inch Quick Clamp. (Main roll cage tubes running front to rear - 1.760 inch actual.) Mule (most models)- 1.750 inch Quick Clamps, but may require sanding to clamps to fit as main roll cage measures slightly oversized at 1.765-1788 inches. Polaris: XP1000- 1.750 inch Quick Clamp. (Main roll cage tubes running front to rear and c-pillar cross bar - 1.760 inch actual.) Turbo S- 1.750 inch Quick Clamp (Main roll cage tubes running front to rear and c-pillar cross bar - 1.760 inch actual.) Pro XP- 2.0 inch Quick Clamp. (Main roll cage tubes running front to rear - 2.01 inch actual.) 1.750 inch Quick Clamp. (for b-pillar cross tube mounting on 4 seat cars) Pro R- 2.0 inch Quick Clamp. (Main roll cage tubes running front to rear - 2.01 inch actual.)
