Stabilizer and side bar quick detach mount by Pat Norris. The quick detach Mount is machined from high-grade aluminum. Now at a lower price. Updated and improved in 2026 The angle adjustment grooves are machined and interacting so it is guaranteed to stay in the exact position you choose. To move it you loosen the set screw and lift it and place it in the next groove or however many grooves you want to move it. Forward stabilizer and back bar combo. Straight or 10 degree down system for front stabilizer. Both are included Fully machined alignment/ locking grooves guaranteed not to slip at any angle. White laser etched and filled measurement guidelines. (will not wear off) Torx wrench screws and single wrench included. Custom washers for a straight front stabilizer or 10 degrees down. Both forward mount and back mount are quick detach systems with stainless steel parts Will accept all stabilizers that have 5/16 X 24 mounting threads.. Does not include stabilizers use your own and see Pat’s recommendation below. Interlocking Alignment: Two mating pieces the a riser-mounted base and the adjustable back unit feature corresponding machined grooves or teeth. When locked together, these teeth mesh to prevent any rotational movement or shifting, even under heavy weight stacks or intense vibration. Designed for Pros and fun shooters, anyone wanting the very best. Pat spent a lot of time bringing this new system to market. It is the most positive holding adjustable front stabilizer and side rear combo mount system available. Pat’s stabilizer mount with rear stabilizer lets you perfectly balance your setup. The back bar system not only lets you balance your bow, but by adjusting the back bar left or right you can positively help your sight level to be level when you reach full draw. You are moving up to the next level. Pat recommends you shoot the new 2025/26 Microwave stabilizers and back bars. They have an internal patented shock absorbing dampening technology. This system is ideal for outdoor shooting where wind could be a problem with the larger diameter stabilizers and has proved itself on the indoor circuit. Both front and rear stabilizers are strong enough to hold any weight you put on them. The high Mod stabilizers provide maximum vibration absorption while providing the strength to support 15 ounces or more of weights.
