// // r-UltraMarathon 3D® PP GF Filament is a high-performance filament produced by 3D4Makers, made from 100% post-consumer recycled polypropylene, reinforced with 30% glass fibers and performance-enhancing additives. This lightweight yet robust material is engineered for functional and demanding applications where strength, stability, and resistance to environmental factors are essential. Optimized for 3D printing, the material offers exceptional stiffness, low warpage, and excellent layer adhesion, making it suitable for outdoor components, marine parts, drone housings, enclosures, and lightweight structural elements that need to perform reliably under harsh conditions. The material features very low moisture uptake, contributing to consistent print performance, and excellent chemical resistance, making it suitable for use in chemically aggressive or industrial settings. Lightweight & Reinforced, Combines low density with high mechanical strength Enhanced Flame Retardancy, Reduced burn rate for increased safety in critical environments Anti-Bacterial & Anti-Fungal Properties, Suitable for hygienic and anti-fouling surfaces Improved UV Resistance, Ensures durability in outdoor and sun-exposed applications High Thermal Stability, Maintains performance even at elevated temperatures Low Moisture Absorption, Consistent performance without pre-drying Material properties Description Value Test method Density 1.120 g/cm³ ISO 1183 Izod impact strength, unnotched, at +23°C 109,6 kJ/m2 ISO 180/1U Izod impact strength, notched, at +23°C 25,9 kJ/m2 ISO 180/1A Tensile modulus 5.463 MPa ISO 527-2 Tensile stress at break 67,1 MPa ISO 527-2 Elongation at break 3,59 % ISO 527-2 Flexural modulus 5.563 MPa ISO 178 Maximum flexural stress 105,7 MPa ISO 178 Shore D Hardness 71 ISO 868 Printer recommendations Description Value Printer nozzle temperature 220-240°C Heated bed temperature 40-60°C Bed Adhesion Magigoo PP GF on CF plate, glass or a PEI Sheet Pre drying recommendations Low moisture uptake (no need for drying) Extra We advise to use a adapted nozzle (0.5mm) for glass filled filaments To get the best results while printing we advise you to keep the 3D printer in a room where there is hardly any draft and/or temperature fluctuations. When the 3D printer is not being used it is important to keep filament in a bag and stored in a cool, dry and dark place until it is used again. Documents Technical Data Sheet () Material Safety Data Sheet ()
