Racetorx Junction Valve brake proportional valve adapters Having your thumb brake or finger brake installed in conjunction with your rear master cylinder has never been easier! Our Junction valves are dual-fitting kits. Junction valves go into the rear (foot) master cylinder and allow both Thumb brakes & scooter brakes to work in conjunction with the footbrake master cylinder. So far we offer 5 types- RTX450 which is used in the likes of Brembo Master cylinder Part number – 10850560 RTX452 is a Teardrop shape with a M4 bolt this is used in Brembo, Nissin and aftermarket master cylinders RTX477 is the Titanium long neck type which fits in Nissin and aftermarket type master cylinders with a plastic nipple and circlip, ID = 18.5mm (Due to the size of the long neck type you require x4 standard copper washers or x2 2mm copper washers) RTX479 is the Titanium long neck type, this is suited for some Brembo & aftermarket type master cylinders with a plastic nipple that can spin, ID 14mm. (first of its kind) for OEM brembo masters like on the KTM superdukes etc) (Due to the size of the long neck type you require x4 standard copper washers or x2 2mm copper washers) This valve works for Brembo BR10477650, found on Aprilia. RTX506 is used on Yamaha YZ and WR models which though they are in stock, there are two versions of the same master cylinder with very slight differences that we are still testing. The Plastic nipple type master cylinders are pushed in with a rubber doughnut, you can pry these out with a set of players to fit the Longneck junction valves Please contact us if you are unsure, See the list below for what fits what so far. A DOUBLE BANJO ON THE REAR (FOOT) MASTER IS NOT THE SOLUTION AND WILL NOT WORK THIS IS WHY JUNCTION VALVES ARE REQUIRED! So far we offer 6 types-RTX450 which is used in the likes of Brembo Master cylinder Part number – 10850560 Primarily Aprilia RSVR/RSV & Husky RTX452 is a Teardrop shape with a M4 bolt this is used in Brembo, Nissin and aftermarket master cylinders ( NOT SUITABLE FOR AFRICA TWIN) Fitment for older generation Honda's. RTX477 is the Titanium long neck type which fits in Nissin and aftermarket type master cylinders with a plastic nipple and circlip, ID = 18.5mm Most commonly on Kawasaki, Honda, Triumph & Suzuki) RTX479 is the Titanium long neck type, this is suited for some Brembo & aftermarket type master cylinders with a plastic nipple that can spin, ID 14mm. (first of its kind) for OEM Brembo masters like on the KTM superdukes, Aprilia RS660, Most Ducati and BMW's) RTX506 is used on Yamaha YZ and WR models. RTX595- Teddy bear Is for- CR125R 2002-2008 CR250R2002-2008 CRF150R/CRF150RB 2007-2020 CRF250R/CRF250RX/CRF250X/CRF250F (Does not Contain CRF250L CRF250RL)2004-2020 CRF450R/RWE/RX/X/L 2002-2020 CRF 250 2006 FITS 2002-2020 RTX613 M24 - is for the new 2024 model master cylinders - CRF450 and husky but as this is a new type please send a picture to confirm first.
Related
Related
Related
Related