The J48™ is an active direct box that has been optimized to handle extreme transients without distortion, with a linear frequency response that extends from 20Hz up to 40kHz. Most battery-powered guitars and basses will produce as much as 7 Volts when played at maximum volume, which can easily overload typical active direct boxes which have are only able to handle about 3 Volts. The J48 uses a unique switching power supply that raises the internal rail voltage so it can handle up to an incredible 9 Volts, resulting in improved signal handling and greater headroom. This additional headroom significantly reduces distortion of all types, allowing the natural tone and character of the instrument to shine through. A direct box is primarily used to get an instrument signal from the stage to the mixing desk and PA system. The Radial J48 delivers the natural tone exceptionally long distances without adding distortion or coloring the sound in any way. When recording direct, the quality of the direct box interface assures the purest signal going to the track. The Radial J48 is particularly well suited for recording bass or capturing a direct track from a guitar. Reamping means sending a dry track from the recorder back out to pedals and amps. This tricks has been used for years by top professionals. The Radial J48 is ideally suited to capture the sound of the instrument for later Reamping. Features Exceptional headroom and dynamic range Retains the natural sound of the instruments Merge switch sums stereo instruments to mono Powered by 48V phantom, no batteries required 15dB Pad: reduces the input sensitivity for active basses and high output keyboard 48V check: flashes once when the 80Hz is depressed to confirm 48V phantom power is present Merge: changes the input and thru-put to two LR inputs and mixes the output to mono at the XLR Input: instrument input connection to the J48 Thru: throughput from the J48 to the amp. Hi impedance will not load instrument down
Related
Related
Related
Related