Guard your electronic equipment, charge your mobile device, and light up your rack with the Radial Engineering Power-2 rackmount surge suppressor and power conditioner. Awarded Best in Show at NAMM 2020, Power-2 offers a sliding multicolor LED tray and nine outlets—one always-on outlet in front and eight switched outlets on the rear—protected against harmful power surges by the USA-made Metal Oxide Varistor. With steel construction and robust components, Power-2 is ready for the challenges of constant sessions and live gigs. Plus, it yields low system noise while keeping radio-frequency interference out. Occupying just 1 RU of rack space, Power-2 is an ideal addition to gear racks used by studio operators, musicians, engineers, and producers. LED Illumination A tray slides out to illuminate rack equipment below, with ultrabright LEDs in seven color options along with a built-in dimmer to adjust as needed. Unswitched Front-Panel Outlet The single front-panel outlet will supply power even when the device is switched off, allowing you to easily connect and charge devices without powering on the entire rack. Switched Rear-Panel Outlets Eight rear-panel outlets are activated via the backlit power switch. Four of the eight outlets offer ample spacing for wall warts. USB Charging Port Also on the front panel is a 5V/1A USB Type-A charging port for mobile devices such as smartphones and tablets. Fault Protection Indicator An LED illuminates when the Power-2's USA-made Metal Oxide Varistor (MOV) is actively working. The MOV is designed to provide continuous protection for your equipment against varying resistance and high-voltage spikes from the AC main power source. Noise Filtering Power-2 utilizes shunt-mode technology and is non ground contaminating for lower system noise. A high-rejection RF interference filter is used to keep high frequencies and AM radio signals out of the power line, preventing contamination of audio signals. Built Tough A heavy-duty power on/off switch, rugged outlet connectors, and steel construction ensure that the Power-2 performs night after night without fail. Features 8 Rear Outlets, 4 with Wall-Wart Spacing 1 Front Outlet LED Tray with Color and Dim Controls USB Charging for Personal Devices USA-Made MOV for Surge Protection High-Rejection RF Interference Filter LED Indicator for Active Protection Illuminated Power Switch Rugged, Tour-Ready Construction Specifications Type Conditioner / Surge Suppressor Amp Rating 15 A Number of Circuits 1 Metering None Battery Backup No Integrated Lamps Yes, 1x Pull-Out (Front Panel) Connections Outlets 1x NEMA 5-15R (Front Panel, Unswitched, 1 Block-Sized)8x NEMA 5-15R (Rear Panel, Switched, 4 Block-Sized) AC Power I/O 1x Hardwired Input Lamp I/O No Additional I/O 1x USB-A Wireless No Electrical AC Input Power 120 VAC, 50 / 60 Hz Load Capacity Not Specified by Manufacturer Sequencing Delay No USB Output 5 V, 1 A Protection & Conditioning Protection Types & Modes Overvoltage, Metal-Oxide Varistor (MOV), EMI Filter Circuit Breaker Yes, at 15 A with Push-Button Reset Undervoltage Protection No Clamping Voltage 130 V at 15 A (Line to Neutral) Maximum Spike Current 20,000 A Surge Protection 210 Joules Transformer Isolated No EMI/RFI Noise Filtration Common-Mode:10 dB (100 kHz)41 dB (1 MHz)50 dB (10 MHz)Traverse/Differential-Mode:19 dB (100 kHz)41 dB (1 MHz)42 dB (10 MHz) Environmental Certifications CSA, UL Operating Temperature 37 to 72°F / 5 to 40°C Physical Rackmount Size 1 RU (with Included Hardware) Cable Length 9' / 2.7 m Wire Gauge 14 AWG Material of Construction Steel Cable Management No Dimensions 19 x 6.38 x 1.47" / 48.3 x 16.21 x 3.73 cm Packaging Info Package Weight 12.42 lb Box Dimensions (LxWxH) 22.7 x 14.2 x 4.6"
Related
Related
Related
Related