This bundle features the basic components to power the RadioLink radio and receiver. Description What's in the Box? Specifications Documentation The next generation of robot remote control is here. Want features? It has features, so many features, more than you can count! This eight-channel controller receiver combination works for any and all situations. Connect it via USB-C to a computer and adjust settings as you see fit! Need to change on the fly? Change settings over Bluetooth from your smartphone! The return spring for both joysticks is preinstalled to provide perfect tank-style robot driving. To use as a throttle controller, remove the spring return and enjoy flight style control. Image is only representative of exact items, PWM cable is 1ft long. Controller Charging The built-in battery of T8S is 1S lithium. When the voltage becomes low, the indicator LED will flash with a warning tone. T8S charging is as simple, just plug in the USB-C cable to a charger. It takes approximately 40 minutes to fully charge T8S. Binding 1) Put the transmitter and the receiver close to each other (about 1 foot) and power on the receiver.2) Switch on the transmitter, and the LED on R8SM will start flashing slowly.3) There is a black binding button (ID SET) on the side of the receiver. Press the button until the LED is flashingquickly and release, meaning the binding process is ongoing.4) When the LED stops flashing and is always on, binding is complete. If not successful, the LED will flash slowly, if this happens, repeat the above steps. Complete Documentation For complete and up to date documentation please see https://www.radiolink.com/t8s_manual Included Items 1 - RadioLink Controller and Receiver (am-4422) 1 - Power Converter 12/24 VDC to 5 VDC (am-3068) 1 - 12 in. 22 Gauge PWM Wire (am-0693b) Current: Controller
Related
Related