Installation Instructions REMOTE MOUNT FUEL FILLERA remote mounted fuel filler is NOT located directly on the fuel tank or fuel cell, but rather somewhere else on the vehicle, such as the fender. See this blog article for more information on fuel cell filling. 20-0505-V Remote Mount Fuel Filler, 1.5in, Vented The fuel filler typically secures to the vehicle body. The vented fuel cap has roll-over protection if the vehicle ever becomes inverted. The fill neck has a machined hose barb connection for 1.5" filler hose (available HERE). The outer diameter is 4.75" and uses 4.25" P.C.D for the five M5 bolts. Total height is 4.1". Requires a 77mm (3.03") hole to be fabricated. Included with 20-0505-V: -Vented Cap with Roll-Over Protection-Flanged Fill Neck for 1.5" ID Hose-Ozone/Flame Resistant Gasket-Anodized Aluminum Nut Ring-Stainless Steel M5 Bolts 20-0505-V Notes: 1. Does not include accessories to connect to the fuel tank.2. Can be upgraded later to a dry break using Radium 20-0549-V. 20-0504-V Dry Break, 1.5in, Female, Remote Mount, Vented This fuel filler typically secures to the vehicle body. The vented fuel cap has roll-over protection if the vehicle ever becomes inverted. The fill neck has a machined hose barb connection for 1.5" filler hose (available HERE). The components, materials, and seals are compatible with all fuel types (unleaded and leaded gasoline, diesel, AV gas, methanol, ethanol, E15, E85, etc.). The outer diameter is 4.75" and uses 4.25" P.C.D for the five M5 bolts. Total height is 4.1". Requires a 77mm (3.03") hole to be fabricated. Included with 20-0504-V: - 20-0549-V Dry Break, 1.5in, Female, Vented- Flanged Fill Neck for 1.5" ID Hose- Ozone/Flame Resistant Gasket- Anodized Aluminum Nut Ring- Stainless Steel M5 Bolts 20-0504-V Notes: 1. Does not include accessories to connect to the fuel tank.2. Is compatible with the simple fuel cap (Radium 20-0548-V Fuel Cap, Remote Mount, Vented). 20-0504-V Specifications: Filler Hose Requirement: 1.5"Flange Outer Diameter: 4.75"Bolt Circle Diameter: 4.25" PCDHeight: 4.08" (Dry Break to Barb)Mate: 20-0496 Dry Break, 1.5in, Male 20-0547 FCST 6-Bolt, Remote Mount Fill Neck, 24AN Elbow, 1.5in Barb This fill neck is primarily used with a body-mounted remote filler (see 20-0505-V). The -24AN fill neck mates to a 24AN hose end capable of 360 degree rotation. It features a 75 degee elbow and uses a 1.5" barb (filler hose available HERE). A bespoke 1-7/8" aluminum wrench is provided for tightening the B-nut and prevent marring. The fill neck features a flapper check valve for rollover protection. Included with 20-0547: - 24AN Flanged Fill Neck- 24AN Hose End Elbow for 1.5" ID Hose- Aluminum Wrench, 1-7/8"- FKM Gasket Flange Seal- FKM Flapper Valve- Stainless Steel Hardware Note: Does not include filler hose, fuel cap, etc. 20-0527 FCST 6-Bolt, Remote Mount Fill Neck, Straight, 1.5in Barb This fill neck is primarily used with a body-mounted remote filler (not included). The fill neck has a machined hose barb connection for 1.5" filler hose (available HERE). The fill neck features a flapper check valve for rollover protection. Included with 20-0527: - Flanged Fill Neck for 1.5" ID Hose- FKM Gasket Flange Seal- FKM Flapper Valve- Stainless Steel Hardware 20-1047 FCST-X 3-Bolt, Remote Mount Fill Neck, 24AN Elbow, 1.5in Barb This fill neck is primarily used with a body-mounted remote filler (see 20-0505-V). The -24AN fill neck mates to a 24AN hose end capable of 360 degree rotation. It features a 75 degee elbow and uses a 1.5" barb (filler hose available HERE). A bespoke 1-7/8" aluminum wrench is provided for tightening the B-nut and prevent marring. The fill neck features a flapper check valve for rollover protection. Included with 20-1047: - 24AN Flanged Fill Neck- 24AN Hose End Elbow for 1.5" ID Hose- Aluminum Wrench, 1-7/8"- FKM O-ring Seal- Stainless Steel Hardware Note: Does not include filler hose, fuel cap, etc. 20-1027 FCST-X 3-Bolt, Remote Mount Fill Neck, Straight, 1.5in Barb This fill neck is primarily used with a body-mounted remote filler (not included). The fill neck has a machined hose barb connection for 1.5" filler hose (available HERE). The fill neck features a flapper check valve for rollover protection.Included with 20-1027: - Flanged Fill Neck for 1.5" ID Hose- FKM O-ring Seal- Stainless Steel Hardware 20-0597 Fuel Fill Neck Hose Kit, 1.5in (Optional Add-On) This hose is convoluted permitting tight bends, as depicted below. The helical wires resist hose kinking. It is compatible with all fuel types and has a long life span. 20-0597 HOSE SPECIFICATIONS Inner Diameter: 1.5" (38mm)Wall Thickness: 0.176" (4.47mm)Length: 3 feet (914mm)Working Pressure: 20-psi maximumBurst Pressure: 90-psi mimimumBend Radius: 5" minimumTube Construction: Nitrile Reinforcement: Synthetic FabricFlex: Two Embedded Helical WiresCover: Neoprene Coated FabricTemperature Range: -40F to 212FStandards: SAE 30R5Made in USA 20-0602 Fuel Fill Neck Hose Kit, 1.5in, Clear (Optional Add-On) This fill hose is perfect for applications that need a visualization of the fuel dynamically filling. Depending on the fuel type used, the clear hose may become cloudy and translucent overtime. Unlike the black reinforced filler hose, this clear hose should be inspected occasionally and replaced if needed. 20-0602 HOSE SPECIFICATIONS Inside Diameter: 2.25" (57mm) IDWall Thickness: 0.2" (5mm)Length: 3 feet (914mm)Max Pressure: 20-psi @ 72FBend Radius: 8" minimumTemperature: -20F to 160FDurometer: 60A
Related
Related
Related
Related