Raise3D Air Filter (E2, E2CF and E3 Only) The FFF 3D printer heats the filament at a high temperature, extrudes the filament through the nozzle, and then deposits the filament into thin layers to form a model. When some filaments are heated by the high temperature, the filaments begin to melt and release fine particulate pollutants and volatile organic compounds into the air. E2, E2CF, and E3 Air filters can effectively filter fine particles and harmful organic volatiles with pungent odors generated during the working process of the 3D printer. Product features: Three-stage filtration system: The E2, E2CF, and E3 Air filter have a three-stage filtration system, which can, to a great extent, absorb the particles and harmful volatiles produced during the printing process. The pre-filter can capture large particles generated during the printing process, such as filament debris; the carbon filter can capture many odors and smoke that can affect health; the HEPA filter is designed according to specific standards to remove ultra-fine particles from the air. Easy to install and easy to replace: The E2, E2CF, and E3 Air filters can be easily installed and replaced. You just need to remove the old E2, E2CF, and E3 Air filter from the printer without tools, and then insert the new E2, E2CF, and E3 Air filter into the filter card slot. Sophisticated design: The nylon grille protects the E2, E2CF, and E3 Air filter from scratches. The handle on the E2, E2CF, and E3 Air filter makes it easy for you to remove the filter. Maintenance tips: When the filter screen of the E2, E2CF, and E3 Air filter turns black, it reminds you that the efficiency of the filter will be reduced, and pollutants will remain in the air. The service life of the filter is 3 to 6 months, depending on your printing time and the printing filaments used. Therefore, it is recommended to replace the filter every 6 months. Safety warning: It is always recommended to use the Raise3D printer in a well-ventilated open space. This prevents the smoke and particles released during the printing process from being concentrated in the printer. When you replace the E2, E2CF, and E3 Air filter, please turn the printer off. Different filaments have different characteristics and also produce different kinds of particulates and exhaust air. For example, ABS is derived from petrochemical products, so it emits some harmful fumes when heated. In contrast, PLA is a biopolymer made from processed plant fibers, thus producing less smoke. It is recommended to choose suitable filaments according to your needs. We recommend that you can use Raise3D Premium official filaments, which have passed ISO 9001 and ISO 14001 certification. Raise3D Air Filter for: Raise3D E2 3D Printer Raise3D E2CF 3D Printer Raise3D E3 3D Printer Specifications: Size: 80 x 80 x 20mmPackaging Size (WxDxH): 180 x 150 x 40mmWeight with Packaging: 40g Specifications Size: 80 x 80 x 20mmPackaging Size (WxDxH): 180 x 150 x 40mmWeight with Packaging: 40g
