(2 Weeks Back Order) The Vektor 2 sits in the center of the RamRods premium stabilizer lineup. It balances stiffness and wind efficiency, making it one of the most versatile high performance stabilizers we produce. It is slightly stiffer but a bit less wind efficient than the Ultra 4, and slightly more wind efficient but less stiff than the Beast. Because of this balance, the Vektor 2 works well for a wide range of archers across both compound and recurve. Technical Specifications Carbon Construction Ultra high modulus carbon fiber layup Diameter Front stabilizers0.60” base tapering to 0.53” tip Side stabilizers0.57” base tapering to 0.53” tip The Wind Taper profile increases stiffness where the stabilizer experiences the most stress while reducing drag at the tip where wind torque is greatest. This geometry also improves vibration reduction compared to a parallel carbon tube. Stiffness C-Spine: 440 Recommended weight rangeFront stabilizer: 3–20 ozSide stabilizer: 3–30 oz The Vektor 2 sits between the Ultra and Beast in overall stiffness, making it one of the most versatile stabilizers in the RamRods lineup. An optional Vektor 2 S version measures 380 C-Spine, providing over 13% additional stiffness for compound athletes who run heavier weight systems. Side rods are not offered in the S version because shorter stabilizers already provide high stiffness and the performance gain does not justify the additional cost. End Caps EDGE aerospace grade aluminum The redesigned end caps maximize strength at the base of the stabilizer while minimizing weight at the tip. This increases natural frequency and improves aiming responsiveness. A deeper overlap between carbon and aluminum also increases durability. Threads 5/16-24 threaded ends Compatible with standard stabilizer weights, dampers, and conversion screws. Stabilizer Mass (without weights) 10” – 2.2 oz11” – 2.4 oz12” – 2.5 oz13” – 2.6 oz14” – 2.7 oz15” – 2.9 oz 26” – 4.4 oz27” – 4.5 oz28” – 4.7 oz29” – 4.8 oz30” – 4.9 oz32” – 5.2 oz Tungsten VIBRO-Core option adds 2 oz Note: Stabilizer lengths are measured from end cap to end cap and do not include additional hardware, weights, or dampers.
