RANSBURG 80765-11200000 RANSFLEX AUTOMATIC APPLICATOR WB The RansFlex is an air atomizing applicator powered by a RVC power supply. The Cascade generates a high voltage DC charge to the electrode creating ang electrostatic field between the atomizer & the target, One of the many features of the RansFlex applicator system is that the electrical energy which is available from the resistive charging electrode, is limited to the optimum level of safety & efficiency. The system is incapable of releasing sufficient electrical or thermal energy during normal operating conditions to cause ignition of specific hazardous material in their mo st easily ignited concentration in air. As the applicator electrode approaches ground, applicator circuitry causes the high voltage to approach zero while the current approaches its maximum value. This performance is validated by independent test agencies that give FM US & C and ATEX EN 50 050. Features Devilbiss spray technology integration into atomization. Independent atom and fan air for optimal adjustment. Includes A #1 V Series 1.4mm (80265-00, 80264-14 & 79809-00)B #1 Non-Bleeder (80577-01)C #2 12mm Post (80583-12, "T" (1x) & "U"(4x))D #0 No Fluid Inlet TubeE #0 No Fluid HoseFF #00 No Power SupplyG #0 No Low voltage Cable Environmental/Physical: Applicator Length 273mm (10.75-inch) Weight (w/Hose) 2.3125 lbs Low voltage cable 79338-XX lengths(std) 10m, 15m, 20m, & 30m Tubing Requirements: Atomizing Air 5/16" (8mm) OD Nylon Fan Air 5/16" (8mm) OD Nylon Trigger Air 5/32" (4mm) OD Nylon Electrical: Operating voltage 65kV DC (-) Maximum Current Output 90 microamperes maximum Paint Resistance .1 *Use model# 76652, Test Equipment Part Sprayability Determine sprayability of part to be coated using 76652 (Test Equipment) Mechanical Fluid Flow Capacity 1000 ml/min. **reflects the max fluid vol the applicator can deliver. The max spray vol that can be effectively depends on fluid rheology, spray tech & finish quality required. Wetted Parts Stainless, polyethylene, nylon, acetal polymer Operating Pressure (Air Spray) Fluid 0-100 psi Air 0-100 psi Trigger 80-100 psi Ambient Temperature 104°F to 41°F Trigger Response time 150 msec open & close
