Rapid Cure MVB is an all-in-one moisture vapor barrier, primer, and pigmented base coat that helps reduce water vapor transmission in concrete surfaces. Its two-component system penetrates and seals the substrate, helping minimize the risk of coating failures, blistering, and delamination. Available in several popular colors, Rapid Cure MVB is compatible with broadcasting flakes and can be sealed with a topcoat of PolyGuard85 Clear. Rapid Cure MVB is a two-component system and is available in 3-gallon kits, which include two gallons of part A and one gallon of part B. One 3-gallon kit covers 100-150 square feet per coat. Coverage will depend on surface porosity and application method. Note: Do not apply on pavers or very porous substrates. For professional use only! Product Features 90% Solids & Low VOC Commercial Grade Low Odor Easy to Apply High Gloss Finish Excellent Chemical Resistance Applications Garage floors Restaurants Service areas Countertops Wood Laminates Directions Preparation: Surfaces must be clean and free of any contaminants before application (oils, grease, or solvents should not be present). New concrete should cure at least 28 days before applying. Rapid Cure MVB’s performance is directly related to how thoroughly the surface is prepared. When applying directly on old concrete or stripped cement, all cracks should be eliminated. Sand/ grind thoroughly with 60-grit sandpaper or diamonds (diamond grind or shotblast to a CSP 1-3 surface profile) and clean off existing coating to provide proper surface profile before applying. Mixing: Start by mixing Parts A and B of Rapid Cure MVB. The correct ratio of 2:1, as provided (2 gallons of Part A to 1 gallon of Part B). Pour Parts A and B into a clean, dry container and gently mix with a drill for 2-3 minutes, avoiding creating air bubbles. Do not mix in a plastic container, as combining Parts A and B can result in a high exothermic reaction, leading to a temperature increase. Always test the product in an obscure area to ensure desired results. Do not apply over clear acrylics, clear water-based systems, pavers, or very porous substrates. Applications: Apply mixed product at a spread rate of 100-150 sq. ft. per gal. using a squeegee and back roll with a non-shedding 3/8” nap roller to achieve a 12-15 wet film thickness. READ LABEL THOROUGHLY BEFORE APPLYING PRODUCT Resources Sales Sheet Technical Data Sheets Technical Data Sheet Tinted Base Technical Data Sheet Clear Safety Data Sheets Safety Data Sheet (Tinted Base - Part A) Safety Data Sheet (Clear Base - Part A) Safety Data Sheet (Part B)
