The Debug Probe, powered by RP2040, is a comprehensive hardware solution for Arm-based microcontrollers. It includes both a USB to two-wire serial debug bridge and a USB to UART bridge, allowing for seamless use of devices like Raspberry Pi Pico on a variety of host platforms, including PC, Mac, and Linux computers. A complete kit for easy, plug-and-play debugging The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. It features both a processor serial debug interface (by default the Arm Serial Wire Debug interface, but other interfaces can be supported) and an industry-standard UART interface. Both interfaces use the Raspberry Pi 3-pin debug connector, as detailed in the Raspberry Pi 3-pin Debug Connector Specification. The Raspberry Pi Debug Probe is a kit comprising the Debug Probe hardware in its own plastic case together with a USB cable and three types of debug cable, covering the vast majority of debug use cases. It is designed to make it easy to debug and program Raspberry Pi Pico and RP2040 with a range of host platforms including Windows, Mac, and typical Linux computers, where you don’t have a GPIO header to connect directly to the Pico’s serial UART or SWD port. While designed for use with Raspberry Pi products, the Debug Probe provides standard UART and CMSIS-DAP interfaces over USB, so it can also be used to debug any Arm-based microcontroller that provides an SWD port with 3V3 I/O, or even just as a USB-to-UART cable. It works with OpenOCD and other tools that support CMSIS-DAP. The Debug Probe is based on Raspberry Pi Pico hardware and runs the open source Raspberry Pi Picoprobe software. The firmware is updated in the same way as Raspberry Pi Pico firmware, so it is easy to keep the unit up to date with the latest firmware, or to use custom firmware. Specification Form factor: 22mm × 32mm USB to two-wire serial debug bridge (Arm Serial Wire Debug supported by default) USB to UART bridge Compatible with the CMSIS-DAP standard Works with OpenOCD and other tools supporting CMSIS-DAP Follows the Raspberry Pi 3-pin Debug Connector Specification Includes a high-quality transparent plastic case Includes a USB cable and three debug cables: 3-pin JST connector to 3-pin JST connector cable; 3-pin JST connector to 0.1-inch header (female); 3-pin JST connector to 0.1-inch header (male) Nominal I/O voltage: 3.3V Includes: 1 x Raspberry Pi Debug Probe with USB to SWD & UART 1 x Fancy protective enclosure 1 x JST SH to JST SH 3-pin SWD cable 1 x JST SH to premium socket (female) header 1 x JST SH to premium plug (male) header USB A to Micro-B cable Documents Raspberry Pi Debug Probe product brief Raspberry Pi Debug Probe documentation Compliance The Raspberry Pi Debug Probe has undergone extensive compliance testing and meets a number of regional and international standards. View and download relevant certificates and conformity documents.If you require any further information regarding compliance, please contact us at [email protected]. The obsolescence statement guarantees that Raspberry Pi Debug Probe will be in production until at least January 2030.
