Raypak 013492F Switch/Decal Membrane Kit – For Select Raypak 206A–408A Digital Pool & Spa Heaters The Raypak 013492F is a replacement membrane switch and decal overlay kit for compatible Raypak digital pool and spa heaters in the 206A–408A size range. If the keypad is unresponsive, buttons are sticking, or the control panel graphics are worn/faded, replacing the membrane restores proper button feel and clear labeling on the heater’s front control interface. Key Features Part Number: 013492F Type: Switch/Decal Membrane (keypad overlay kit) Function: Restores control-panel button operation and replaces worn/faded front panel graphics Typical application: Raypak digital pool & spa heaters in the 206A–408A family (electronic ignition versions) Common symptoms fixed: Non-responsive buttons, intermittent keypad input, torn or peeling overlay, hard-to-read labels Compatibility Notes Commonly listed for Raypak digital heater families in the 206A–408A range. Fit can vary by heater revision and control style. Verify before ordering: Match the part number to your heater’s model/serial tag and parts diagram to confirm the correct membrane style for your control panel. If your heater has a different keypad layout or display style, you may need a different membrane/overlay part number. Basic Replacement Overview Turn off power to the heater at the breaker and confirm the control panel is fully de-energized. Open the control panel area per the heater manual to access the membrane tail/connector. Carefully disconnect the membrane from the control board and remove the old overlay. Clean the mounting surface, align the new membrane/overlay, and press firmly to bond evenly. Reconnect the membrane to the control board, reassemble, and test all buttons for proper response. Related Products Search: Raypak 013492F Search: Raypak Control Boards Search: Raypak Display / Keypad Parts Search: Raypak Heater Gaskets Search: Raypak Pressure Switch Shop: Raypak Installation & Maintenance Tips Do not attempt replacement with power on. Always shut off power at the breaker before opening the control panel. Keep the control panel dry; moisture intrusion is a common cause of keypad and control issues. When applying the new overlay, align carefully before pressing down to avoid wrinkles and poor adhesion. If buttons still don’t respond after replacement, inspect the control board connector and cable seating for damage or corrosion. Use mild soap and water on the exterior panel only—avoid harsh solvents that can damage printed graphics.
