The HDL6-A is the ideal choice when line array performance is needed and a fast and easy set-up a must.RCF HDL6-A overviewThe black HDL 6-A Active Line Array Module from RCF is a 2-way active line array module designed for live sound reinforcement and installed sound applications. Powered by a 1400W 2-channel class-D amplifier, it features two 6" neodymium woofers for a solid bass reproduction and a 1.7" voice coil compression driver mounted on a precise 100 x 10° waveguide. The powerful DSP processes the sound including crossover, phase correction, limiting, and protection. The system accept female XLR input connectors and line-level signals from a mixing console or other signal source. The output XLR male connector provides a loop-trough for speaker's daisy chaining. The volume knob controls the volume of the power amplifier. The control ranges from maximum attenuation to the maximum level (maximum output). Equipped with two aluminum rear handles for portability Features RCF transducers Integrated mechanics are both fast and reconfigurable, allowing the system engineer to create J-shaped or spiral arrays Wooden reinforced composite polypropylene enclosure Integrated processing and cabling reduction Digital amplifier with switch mode power supply and DSP controlled input section with selectable presets Powered by a 1400W peak power digital amplifier, split 400W for the HF, and 1000W for the LF HF projection is adjusted by the button on the rear of the cabinets 2.0" inside-outside voice coil Water-resistant fiber doped cone Polycotton M-roll surround High-power magnetic structure Inside/outside coil doubles the dissipation surface Adhesion area to the former is doubled ND 340 high-power compression driver 1.7" voice coil with a crossover point of 900 Hz Coverage and dispersion control Edge wound voice coils Linear frequency response and maximum SPL output RCF HDL6-A specs: Acoustic Specifications Frequency Response (-3 dB) 65 Hz to 20 kHz Maximum SPL 131 dB Horizontal Coverage Angle 100° Vertical Coverage Angle 10° maximum Compression Driver 1.0" (2.5 cm) neo, 1.7" (4.3 cm) voice coil Woofer 2 x 6" (15.2 cm) neo, 2.0" (5.1 cm) voice coil Input Input Connectors XLR male Output Connectors XLR female Input Sensitivity +4 dBu Power Indicators Power cord is connected and the power switch is turned on this indicator lights green Signal Indicator Signal indicator lights green if there is signal present on the main XLR input Limiter Built-in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers Processor Crossover Frequencies 900 Hz Protection Thermal, RMS Limiter Soft limiter Controls HF correction Amplifier Peak Power Total: 1400 W High Frequencies: 400 W Low Frequencies: 1000 W RMS Power Total: 700 W High Frequencies: 200 W Low Frequencies: 500 W Cooling Convection Connection VDE connector in Physical Hardware Array fittings Cabinet Composite PP Handles 2 back Dimensions 9.3 x 18.5 x 15" (23.7 x 47 x 37.7 cm) Weight 25.4 lb (11.5 kg)
