Reach M2 Multi-band RTK GNSS Module

E38 Survey Solutions Verified independent store

→

Package includes – Reach M2– Micro-USB cable– JST-GH 6-pin to jumper pin cable– JST-GH 5-pin to jumper pin cable PPK mapping with centimeter accuracy. Use fewer GCPs Why camera syn chronizations is so important Usually autopilot triggers the camera and records the coordinate it has at that moment. When the drone is flying at 20 m/s and GPS works at 5 Hz, that means your autopilot will have position reading only each 4 m, which is not suitable for precise georeferencing. In addition, there is always a delay between the trigger and the actual moment the photo is taken. Reach eliminates the delay Reach solves the problem of positioning by connecting directly to the camera hot shoe port, which is synced with the shutter. The time and coordinates of each photo are logged with a resolution of less than a microsecond. This method allows GCPs to be used only to check your accuracy. 1. Connect Reach to a hot shoe port Every time a photo is taken camera produces a pulse on a flash hot-shoe connector which is synced to a shutter opening. 2. Fly a drone, Reach will record photo events Reach captures flash sync pulses with sub-microsecond resolution and stores them in a raw data RINEX log in the internal memory. 3. Download logs from Reach and base station After the flight, get the RINEX logs from your airborne Reach module and a base station (Reach RS, CORS or another receiver). 4. Process logs and get a file with geotags Process RINEX files using free RTKLIB software. The produced file with precise coordinates of the photos can be used for georeferencing. NTRIP or another Reach as a base station To calculate centimeter-precise coordinates in PPK and RTK, Reach needs corrections from a base station. It could be either another Reach receiver or an NTRIP service. VRS is also supported. Compatibility Reach M2 works seamlessly with other Reach receivers over any link and are compatible with any other receiver that supports RTCM3 and NTRIP. Reach M2 and Reach RS2 Provides robust performance and quick initialization. Allows working on long baselines. RTK | Up to 60 km PPK | Up to 100 km Time to get fix | 5 sec Frequency bands | Multi-band-band RINEX logging update rate | Up to 20 Hz Comes with an app Emlid Flow is the most user-friendly software for data collection that is available both for Android and iOS. With Emlid Flow, you can control all the features of Reach receivers, such as setting up a base station, logging RINEX data, configuring NMEA output, and monitoring data. Camera control Reach is able to trigger cameras as well as register events. The event mark feature is a must for aerial mapping as it allows the precise time when the shutter was activated to be registered. Simple log management Logs are automatically recorded directly to RINEX in the internal memory. View a list of the logs and download them using the Emlid Flow app. Monitoring data Emlid Flow shows current satellite levels, your location on a map, and much more. Specifications Reach M2 Mechanical Dimensions: 15.4 x 45.3 x 14.6 mm Weight: 20 g Operating temp: -20 to 65 C Electrical Input voltage on USB and JST GH 4.75 - 5.5 V Antenna DC bias 3.3 V Av. consumption @ 5V: 200 mA Positioning Static horizontal 4 mm + 0.5 ppm Static vertical 8 mm + 1 ppm Kinematic horizontal 7 mm + 1 ppm Kinematic vertical 14 mm + 1 ppm Connectivity LoRa radio (sold separately) Frequency range 868/915 MHz Distance Up to 8 km Wi-Fi / Bluetooth Data Corrections NTRIP, RTCM3 Position output NMEA, LLH/XYZ Data logging RINEX with events with update rate up to 20 Hz Internal storage 16GB GNSS Signal tracked GPS/QZSS L1 C/A, L2CGLONASS L1OF, L2OFBeiDou B1l, B2l Galileo E1-B/C, E5b Number of channels 184 Update rates 10 Hz GNSS IMU 9DOF Show more