The new and improved ReefBreeders Pico LED V2 has been redesigned to be user-friendly with advanced features and twice the power of the V1. The Pico LED V2 has 15watts of LED power and includes a built in two-channel dimmer and timer. Each channel can be dimmed in 10 percent increments for precise color control. The built in timer can be set to operate for eight, ten, or twelve hour run times. The timer is set at the desired time, and it will automatically shut off based on your selection. The Pico LED V2 is available in three spectrums, Reef, Refugium, and Freshwater/Display Refugium. Each Pico V2 includes an integrated gooseneck mount for aquarium trims/glass up to 1 inch thick. The light measures 3.4" in diameter x 1.05" thick with a 10" gooseneck. Spectrum Channel A Channel B Coverage Area Saltwater 1 x 7500K Cool White 1 x 420nm Violet 1 x 480nm Cool Blue 3 x 450nm Royal Blue Soft Corals/FOWLR: 24” x 24”Mixed Reef: 18” x 18”SPS: 12” x 12” Refugium 3 x 660nm Deep Red 1 x 450nm Royal Blue 2 x 660nm Deep Red Medium/low light algae: 24” x 24”High Light Algae: 18” x 18” Freshwater/Display Refugium 3 x 3500K Warm White 2 x 7500K Cool White 1 x 450nm Royal Blue Medium/low light plants: 24” x 24”High Light Plants: 18” x 18” Instructions: Mount the light to your aquarium using the built in gooseneck mount. Secure the screws firmly, but do not over-tighten them. Plug the power supply into your light, then plug the power supply into the wall, in that order. Press the power button to turn your light on or off. Adjust the intensity and color spectrum by pressing A or B. Each press changes the output by 10%. If desired, set the timer to 8, 10, or 12 hours by pressing the clock icon, 1, 2, or 3 times. Make sure you set this at your desired on time. The light will automatically run for the prescribed time each day. For example, if you set your light to 8 hours at 9AM, it will shut off at 5PM, then turn back on at 9AM the next day.
