Rega Mercury Reference Preamplifier

Vinyl Sound USA Verified independent store

→

Rega Mercury Reference Preamplifier at Vinyl Sound Buffalo, NY USA The Rega Mercury is the flagship reference preamplifier from Rega Research (Southend-on-Sea, Essex, UK), availabl e at Vinyl Sound in Buffalo, NY USA. The culmination of almost four decades of Rega electronics engineering experience in solid-state amplifier development, the Mercury is the most electronically complex product Rega has ever built, featuring fully discrete symmetrical circuitry in the core signal path with an ultra-low noise floor for exceptional dynamic range, a built-in high-performance DAC with S/PDIF coaxial, optical, and galvanically isolated asynchronous USB inputs, a discrete headphone amplifier delivering 2.5W into 33 ohms, a full colour IPS display, and the custom backlit Orbit remote control. Named for Mercury — the planet closest to the sun, the preamplifier as the closest companion to its matching Solis power amplifier. Hi-Fi Choice concluded that the Mercury and Solis nail the brief with absolute assurance, delivering a Rega experience honed to perfection. What Hi-Fi? described the Mercury/Solis pairing as a hugely entertaining proposition that puts the music first, finding the soundstage wide and deep with an unusually transparent picture and a greater sense of kinetic aliveness than they had heard from a Rega system. Fully Discrete Symmetrical Signal Path and Ultra-Low Noise Architecture The Mercury's core preamplifier circuit traces its lineage directly to the first Rega Elicit amplifier from the early 1990s, refined through almost four decades of Rega's in-house electronics engineering into its current form. The fully discrete symmetrical circuitry uses no integrated circuit op-amps in the core signal path, with every stage implemented using discrete transistor amplifier stages for maximum circuit transparency and minimum noise floor interaction between stages. The symmetrical topology ensures that the positive and negative halves of the audio signal are processed identically through matched circuit branches, cancelling common-mode noise and distortion that asymmetrical designs cannot eliminate. Rega's engineering team has spent four years developing and fine-tuning the circuit topology, with the power supply arrangement designed to provide a stable, low-noise feed to the analogue, digital, and control sections while taking special care to avoid unwanted interactions between these three fundamentally different circuit domains. The pre-amplifier THD+N of typically 0.001% at 1kHz at 2V unbalanced reflects the noise floor achievement of the discrete symmetrical architecture, a figure competitive with the finest reference preamplifiers available. The frequency response extends from 8Hz (-0.5dB) to 28kHz (-0.5dB) at 0dB gain on balanced input and output, ensuring full-bandwidth linearity across the audio spectrum without frequency-dependent phase shift. Wolfson DAC, Galvanically Isolated USB, and Discrete Headphone Amplifier The Mercury integrates a high-performance DAC section built around a pair of Wolfson WM8742 DAC chips, selected for their engineering and sonic capabilities rather than their vintage — Rega acknowledges these are established devices but maintains they represent the best available sonic performance for this application. S/PDIF coaxial and optical inputs accept 16 to 24-bit PCM at sample rates from 32kHz through 192kHz, while the galvanically isolated asynchronous USB input — drawing under 0.5mA from the connected device — accepts 16 to 32-bit PCM at the same sample rates plus DSD64 via DoP. The galvanic isolation of the USB input eliminates ground loops between the connected computer and the Mercury's sensitive analogue circuits, preventing the noise that USB ground connections typically inject into downstream audio. The discrete headphone amplifier provides 9V/2.5W into 33 ohms and 10.85V/0.5W into 240 ohms, with THD+N of typically 0.0035% at 1kHz — performance figures reflecting a dedicated discrete amplifier circuit rather than a buffer from the main signal path. The full colour IPS display provides clear readout of input selection, volume level, and digital input format, with the custom backlit Orbit remote control providing full function control from the listening position. No phono stage is integrated; Rega's recommendation is to pair the Mercury with the Aura MC reference phono stage for vinyl sources in a complete reference Rega system at Vinyl Sound Buffalo, NY USA. Key Features Fully Discrete Symmetrical Core Signal Path: No op-amps in the preamplifier signal path — all discrete transistor stages in matched symmetrical topology for minimum noise floor and maximum circuit transparency. Ultra-Low Noise Floor: 0.001% THD+N at 1kHz, 2V unbalanced — the lowest noise performance in Rega's preamplifier history — enabling exceptional dynamic range and retrieval of subtle low-level musical details. Built-In High-Performance DAC: Wolfson WM8742 pair accepting S/PDIF coaxial and optical at up to 24-bit/192kHz PCM, and galvanically isolated asynchronous USB at up to 32-bit/192kHz PCM or DSD64 (DoP). Galvanically Isolated Asynchronous USB: USB input isolated from the computer ground path to eliminate USB-induced noise, drawing under 0.5mA from the connected device. Discrete Headphone Amplifier: Dedicated discrete circuit delivering 2.5W into 33 ohms and 0.5W into 240 ohms with 0.0035% THD+N — reference headphone performance from a separate amplifier circuit. Full Colour IPS Display: High-resolution colour display for input, volume, and digital format readout with the backlit Orbit remote control. Balanced and Unbalanced I/O: Full balanced XLR and unbalanced RCA inputs and outputs for maximum system flexibility. Automatic Standby: Activates after 20 minutes without signal at 0.4W power consumption. Matches Rega Solis Power Amplifier: Designed as natural companion to the Rega Solis 168W stereo power amplifier in a complete reference separates system. Lifetime Limited Warranty: Rega lifetime warranty against manufacturing defects. Technical Specifications Preamplifier THD+N Typically 0.001% at 1kHz, 2V unbalanced (0dB gain) Preamplifier Frequency Response 8Hz to 28kHz (-0.5dB) at 0dB gain, balanced I/O DAC Chips Wolfson WM8742 (pair) DAC THD+N Typically 0.0045% at 1kHz, 0dBFS, 2V Pre Out S/PDIF Coaxial and Optical 16-24 bit at 32/44.1/48/88.2/96/176.4/192kHz USB Input 16-32 bit at 44.1/48/88.2/96/176.4/192kHz PCM or DSD64 (DoP), asynchronous, galvanically isolated USB Power Consumption 0W (under 0.5mA) Headphone THD+N Typically 0.0035% at 1kHz, 2V into 240Ω or 33Ω Headphone Max Level (33Ω) 9V / 2.5W at 0.1% THD+N Headphone Max Level (240Ω) 10.85V / 0.5W at 0.1% THD+N Power Consumption 50W (operating), 0.4W (standby, after 20 min) Display Full colour IPS Remote Control Custom backlit Orbit remote Dimensions (W x H x D) 435 x 97 x 380mm Weight 14kg Origin Handmade in the UK Warranty Lifetime Limited Warranty Awards and Critical Recognition Hi-Fi Choice, March 2026: "The Mercury and Solis nail the brief with absolute assurance; delivering a Rega experience honed to perfection." What Hi-Fi?, February 2026: "A hugely entertaining proposition that puts the music first — soundstage wide and deep, an unusually transparent picture and a greater sense of kinetic aliveness." The Ear, December 2025: Reviewed as part of Rega's reference duo, awarded Editors' Choice alongside the Solis power amplifier. Frequently Asked Questions What is the Rega Mercury? The Rega Mercury is the flagship reference preamplifier from Rega Research of the UK, available at Vinyl Sound Buffalo. It is the most electronically complex product Rega has ever built, featuring fully discrete symmetrical circuitry with 0.001% THD+N, a Wolfson WM8742 DAC pair accepting S/PDIF and galvanically isolated USB at up to DSD64, a discrete headphone amplifier delivering 2.5W into 33 ohms, a full colour IPS display, and the custom Orbit remote. Hi-Fi Choice described the Mercury and Solis pairing as delivering a Rega experience honed to perfection. How does the Mercury compare to the Rega Aethos integrated amplifier? The Rega Mercury is a dedicated preamplifier designed to partner with the Solis power amplifier or other power amplifiers, while the Aethos is a fully integrated stereo amplifier. The Mercury represents a significant step above the Aethos in preamplifier circuit complexity and specification — Rega describes it as the most complex product they have ever built — with the discrete symmetrical topology developed over four years specifically targeting the ultra-low noise floor that integrated amplifier preamplifier sections cannot achieve without sharing a chassis with power amplification. The Mercury/Solis combination costs considerably more than the Aethos and represents Rega's absolute reference for separates-based high-performance amplification. Does the Rega Mercury have a phono stage? No, the Rega Mercury does not include an internal phono stage. Rega made this decision because achieving the desired phono performance within the Mercury's price point would have required increasing the already substantial cost of the unit, and because the electromagnetic isolation challenges of combining a phono stage with the Mercury's low-noise analogue circuitry, DAC, and headphone amplifier in a single chassis would compromise the performance of all sections. Rega recommends pairing the Mercury with the Aura MC reference phono stage for vinyl source connections, with the Aura's output feeding the Mercury's balanced or unbalanced line inputs. What is the advantage of galvanic USB isolation in the Mercury? Galvanic USB isolation in the Mercury breaks the direct electrical connection between the USB cable's ground conductor and the Mercury's internal circuits, preventing the noise carried on computer USB ground references from entering the Mercury's sensitive analogue circuitry. Computers, laptops, and music servers generate significant switching noise on their USB ground connections from display backlight inverters, processor voltage regulators, and storage device controllers. Without galvanic isolation, this noise couples directly into a DAC's ground plane and raises the noise floor of the converted analog signal. The Mercury's isolated USB input consumes under 0.5mA from the connected device, with the asynchronous transfer mode ensuring the Mercury's own clock controls the data transfer rate for minimum jitter. Can the Mercury be used with power amplifiers other than the Rega Solis? Yes, the Rega Mercury provides both balanced XLR and unbalanced RCA main outputs, making it compatible with any power amplifier with standard balanced or unbalanced inputs. Its output impedance is optimized for driving standard power amplifier input impedances, and the balanced XLR outputs provide common-mode noise rejection advantages over unbalanced connections in longer cable runs. Vinyl Sound Buffalo can advise on pairing the Mercury with non-Rega power amplifiers for customers who prefer a mixed-brand separates system. Where can I buy the Rega Mercury in Buffalo, NY? The Rega Mercury Reference Preamplifier is available at Vinyl Sound USA Inc. in Buffalo, NY, your authorised Rega dealer serving Western New York and the United States. Vinyl Sound carries the complete Rega electronics lineup including the Mercury, Solis, Aethos, and Aura MC phono stage. Visit vinylsound.com or contact the Buffalo store for current availability and expert system matching guidance for the Rega Mercury in a reference separates system. Show more