Where Rega’s flagship engineering starts: a Tancast 8 foam core plinth, dual layer glass platter, and the Neo PSU included and hand-tuned to this deck’s motor. The Planar 6 is the point at which the range stops iterating and starts borrowing from the reference decks. The plinth abandons laminated board entirely for a Tancast 8 polyurethane foam core skinned in high pressure laminate — an ultra-light, very stiff sandwich that Rega uses all the way up to the Planar 10. The argument is counterintuitive but consistent across Rega’s whole catalogue: a light, stiff plinth stores and releases less energy than a heavy one. Double brace technology ties the tonearm mount to the bearing housing. The platter becomes a dual layer float glass assembly, and the RB330 arm gains a custom stainless steel balance weight in place of the standard mild steel item. The decisive change is the power supply. This is the first deck in the range where the Neo PSU is included rather than optional, and it is not a generic bolt-on — it is custom-matched and hand-tuned to that individual turntable’s motor. You get push-button electronic speed change, an advanced anti-vibration motor circuit, and user-adjustable fine speed in 0.01 RPM steps. The Reference EBLT belt is standard. Cartridge is a factory-fitted option rather than standard: Nd5, Nd7 or the Ania Pro moving coil. Features Tancast 8 polyurethane foam core plinth skinned in high pressure laminate Double brace technology tying the tonearm mounting to the bearing housing Dual layer Optiwhite float glass platter RB330 tonearm with custom stainless steel balance weight Neo PSU included, custom-matched and hand-tuned to this turntable’s motor Electronic speed change with 0.01 RPM fine adjustment and anti-vibration motor circuit Reference EBLT drive belt fitted as standard Cartridge optional — Nd5, Nd7 or Ania Pro factory-fitted Made in England Specifications Type: Belt-drive turntable with tonearm and matched power supply; cartridge optional Plinth: Ultra-light Tancast 8 polyurethane foam core sandwiched between high pressure laminate skins, with double brace technology Platter: Dual layer Optiwhite float glass. Rega publishes no thickness on the Planar 6 page — see the note below Motor: 24V low-noise, hand-tuned to its matched Neo PSU Speed Change: Electronic, via the supplied Neo PSU. Front panel 33/45 button with 0.01 RPM fine adjustment Power Supply: Neo PSU MK2 included and custom-matched. PSU dimensions 180 x 50 x 155 mm (W x H x D) Tonearm: Hand-assembled RB330 with custom stainless steel balance weight, upgraded from the mild steel weight on the standard Planar 3 Tonearm Geometry: Effective mass 11g; effective length 236.5mm; mounting distance 222mm from platter centre to arm hole centre; offset angle 21.55°; overhang 14.5mm. These figures are shared across the RB220, RB330, RB880 and RB3000 Arm Height / VTA: Not adjustable. This is deliberate on Rega’s part rather than an omission, and the company states its reasoning plainly: it believes the integrity of the arm fixing to the arm board matters more than the questionable facility of arm height adjustment. Rega’s guidance is that the arm should sit reasonably parallel to the record surface or slightly lower at the mounting, and that its optional 2mm spacers are only needed if the rear of a cartridge fouls the record while playing Cartridge: Optional factory-fitted — Nd5 or Nd7 moving magnet, or the Ania Pro moving coil Drive Belt: Reference EBLT Connectivity: RCA phono output; mini-DIN for the supplied Neo PSU Dimensions: 447 x 120 x 360 mm (W x H x D), lid closed Weight: 5.2kg, turntable Finishes: Matt Polaris Grey, Matt White Origin: Rega Research Ltd, Southend-on-Sea, Essex. Rega’s own wording is that every product is designed and assembled in the UK — assembled rather than wholly manufactured, which is the phrasing we use rather than claiming complete UK component sourcing. Rega additionally states Made in England on this model Warranty: Lifetime Limited Warranty against confirmed manufacturing defects. It does not cover wear and tear or parts considered consumable, and unauthorised modification may invalidate it. Rega states cover is contingent on parts remaining available, is not transferable, and is valid only in the country of purchase Not Published: Platter thickness on the Planar 6 page; bearing material and construction detail on this page; wow and flutter; rumble; speed accuracy; an itemised box contents list Note: Rega’s own Planar 6 RS Edition page specifies a 16mm dual layer platter. If the two decks share a platter that figure would apply here too, but Rega has not confirmed it on the Planar 6 page, so we have not printed it as this model’s specification. Rega publishes no wow and flutter, rumble or speed accuracy figure for any turntable in the Planar range. We checked every product page and five downloadable Rega manuals — Rega’s manuals are setup guides rather than datasheets, and contain no measurement section at all. Any such number you see quoted against a Rega deck comes from a third-party magazine test, not from Rega
