Damaging the flex on a power tool can be an expensive affair! Our replacement power cords are an ideal, easy to fit replacement, which will match or exceed the performance of the original cable. The replacement cable required can be determined by looking at the text printed or embossed on the side of the original cable and matching it with the table below. Text Overall Cable Diameter* Cable Type (Diameter of Each Core) 2C1, 2G1, 2G1mm2, 2x1mm2 7mm 2 core, 1mmsq 3C1, 3G1, 3G1mm2, 3x1mm2 9mm 3 core, 1mmsq 3C1.5, 3G1.5, 3G1.5mm2, 3x1.5mm2 10mm 3 core, 1.5mmsq * N.B. Diameter may vary between cable types e.g. PVC may be slightly smaller than H07 rubber. If you are not sure whether the cable has 2 or 3 cores, check the appliance label for this symbol. If it present the the appliance is double insulated/type II and will have a 2 core cable. Specification: Available in 1mm 2 core, 1mm 3 core and 1.5mm 3 core. 1mm cable is available in 2.1m and 3.1m lengths. 1.5mm cables is available in 2.1m, 3.1m, 4.1m and 5.1m lengths. 10cm stripped at one end. Easy to fit yourself using the small Wago lever connectors which are included. These are ideal for maintaining a safe connection within tools subject to vibrations. Industrial specification H07RN-F rubber cable, specifically manufactured for harsh environments with high mechanical, chemical, water and UV resistance. Flexibility and performance is retained over a wide temperature range (-25 to 55°C). Find out what’s so special about our cables. Contact us for custom lengths and connectors.
