Everyday PLA for prototypes, school projects, and day-to-day prints. RepRapper Tech PLA is our long-time house-brand spool. Easy to print on most FDM machines, low warp for a PLA, and it can stick well even without a heated bed when you use tape or a good surface. What's Included PLA on a 1 kg or 5 kg spool (pick colour + weight) Vacuum-sealed bag with desiccant on the 1 kg pack Diameter held to about ±0.03 mm Tangle-free, layer-by-layer wind Print Settings Nozzle: 190–220°C (many prints land near 205°C) Bed: 40–60°C optional Bed help: painter's tape or your usual PLA surface Tune for your printer. If layers look too soft, drop a few degrees. If adhesion is weak, nudge bed or nozzle up a little. Material RepRapper uses virgin NatureWorks Ingeo PLA pellets for this line. Low odor for indoor use. Good To Know This is standard PLA, not Silk, not MPLA/PLA+, not glow, not carbon-filled Keep the bag sealed with the desiccant between jobs when you can Good For Prototypes and fit checks School and classroom projects Everyday household prints and display models First rolls when you want reliable, low-fuss PLA
