Note (6/23/26): Version 2.2 is now shipping. Limited stock available! After three years of development and extensive testing, the final design features OEM-style PVC/Nylon construction along with an added third mounting point for improved strength and fitment. Note 5/20/26 – V2.2 has been finalized - However, mold revisions, prototyping, testing, and refinement took longer than expected to achieve a flawless top-surface finish, delaying the production batch arrival to June–July. Note 2/8/26 - Currently undergoing improvements/development. V2.2 production batch on the way - With focus on eliminating/reducing top surface and side marks ETA March-April 2026. --- These later model (1994-1998, compatible with 91-98) front fender to bumper "solid one piece" moldings help freshen up and modernize the MR2. Very popular and a faithful reproduction of discontinued version from Toyota. There were about a total of 6 variations from Toyota of these solid one piece moldings. Our version is based on the USDM "thicker" version. 06/2026+ - V2.2 Production Batch Same as V2.1 but with top surface improvements via tweaking nylon inner structure to reduce top side shrinkage marks tldr - Ultimate - As good as it gets. Reduced front pattern depth for better surface quality, introduced surfaces on back side to retain/increase rigidity 02/2026+ - V2.1 Limited Prototyping Batch (Discontinued & Sold Out) PVC Hardness 75A construction w/ nylon plastic injected inner (Similar to OEM construction) Added 3rd mounting point for fine tuning if needed Titanium dioxide for UV resistance Rust/Corrosion resistant M6 mounting stud Stiff yet flexible just like OEM, stiffer than V2.0 11/2025+ - V2.0 Limited Prototyping Batch (Discontinued & Sold Out) PVC Hardness 55A construction w/ metal stamp formed plate inner May have some exposed metal and surface defects due to deformation during high pressure pvc injection M5x0.8 instead of M6x1.0 Mounting hardware (Production Error) Significantly stiffer than V1.0 Recommend surface prep before painting 2018-2024 - V1.0 (Discontinued & Sold Out) Rubber Construction w/ metal inner support plate Flexible to your desired position Drop in fit, no modifications needed Requires painting (Rubber will crack within a month when exposed to high heat or UV without protection) Test fit before painting Stainless Steel Hardware Included 1 Pair of moldings (Left and Right) with M6 stainless steel nuts Fitment All 1990-1998 Toyota MR2 SW20
