Preparing the surface of old wood just got a lot easier with the Restorer. Boasting many of the benefits of both a belt sander and an angle grinder this unique tool takes removing material from the surface of wood, metal, concrete and more to a new level. The flat roller of the Restorer yields a smoother finish on wood as the abrasive can be aligned with the grain of the sanding surface. The tool is well-balanced, with a pistol grip for one-handed use, and a front palm grip for working vertically or overhead. During use, the work surface stays cool and debris is pushed away from the surface toward the dust port, which can be hooked to most shop vacs or dust extractors. Changing the sanding sleeve is simple and tool-free. This will be your first tool pick for your next project, whether you are tackling a rough pallet or a slab. Additional accessory sanding sleeves and wheel attachments are sold separately.Features: Designed to remove paint and finish from wood, brick, and fiberglass Works on nearly any type of surface, flat or curved, wet or dry Easy accessory changes with the quick-release end cover Remove rust and polish metal Ergonomically balanced and lightweight Trigger lock to save your grip during long sanding sessions Powerful 3.5 amp variable-speed motor Specifications: UL, CSA and ETL Safety Listed Speed: 1,000-3,200 feet per minute (variable) Motor Type: Brushed Amps: 3.5 Voltage: 120 Dust Port: 1-1/4" ID Cord Length: 8' Overall Size: 6.25" H x 6.59" W x 12.72" L Tool Weight: 4.5 lb Model: WR351K2 What's Included: The Restorer Tool Kit with Accessories and bag includes: (6) Sanding Sleeves (2 each in 120 grit, 80 grit and 60 grit) (1) Medium Abrasive Roller Sleeve (1) Coarse Abrasive Roller Sleeve (1) Rust and Paint Remover Wheel (1) Tool Bag Product Notes: To change the sanding sleeve: Unlatch the two hooks from the side of the roller cover, and slide off the drum with sleeve attached. Squeeze slightly and slide sleeve off the roller drum. To replace, squeeze the roller drum slightly, and slide the new sleeve onto it. The roller drum is imprinted with “this side up” to ensure it is installed with the correct orientation. Replace the cover and latch again. If you’re using one of the optional accessory wheels (sold separately), remove the drum roll and load the accessory wheel so “this side up” is visible. Then close and latch again. FAQs Can it cut at angles easily, and does the bevel scale stay accurate? Yes. The Restorer uses a flat, cylindrical drum that helps prevent gouging on wood, especially when the abrasive is aligned with the grain, producing a smoother and more controlled finish than an angle grinder or traditional aggressive sander. Can it be used on metal, concrete, brick, or fiberglass? Yes. With the appropriate accessories, the Restorer is designed to sand, strip, clean, and polish wood, metal, concrete, brick, masonry, and fiberglass, making it a versatile surface‑preparation tool for many materials.
