✦ Verified product
Ridstar entire bolt set
USD 109.99
Torx Works
Verified independent store
→
2) Main frame & structural bolts Headset / Stem clamp bolt(s) Function: secures stem to fork steerer / adjusts headset preload. Likely: M6 or M8 socket cap bolt (allen) × 2–4. Esti
mate: M8×25–35mm for top clamp, M6 for accessory screws. (estimate) Notes: Manual shows installing handlebars and tightening stem screws during assembly. Gleeride+1 Top tube / battery tray mounting bolts (frame-mounted battery compartment) Function: secures battery housing to frame and battery tray to lower bracket. Likely: M8 flange bolts or countersunk screws. Estimate: M8×20–30mm. (partially official) Notes: Manuals show removable battery and mention mounting hardware; Ridstar sells battery mounting accessories. Media Amazon+1 Rear triangle / swingarm pivot bolts (if present on Q20 full-suspension variant) Function: pivots for rear suspension linkage. Likely: high-strength M10 or M12 pivot bolts with nuts / pressed bushings. Estimate: M10×40–70mm. (estimate — check if your model has rear suspension) 3) Fork, wheel & axle hardware Front wheel axle / thru-axle or bolt Function: secures front wheel to fork. Likely: solid axle bolt with nut or thru-axle. Community posts mention front axle nut issues and replacement kits. (official: front wheel screws/nuts kits sold). Reddit+1 Estimate sizes: wheel nut commonly M10 or M12 (measure axle). Brake rotor mounting bolts (6-bolt rotor) Function: bolts rotor to hub. Likely: 6 × M5×12mm Torx/Hex button-head bolts (typical e-bike/MTB spec). (estimate) Brake caliper mount bolts Function: secure brake caliper to fork or swingarm. Likely: M6×16–25mm hex bolts (IS or Post-Mount adapter bolts). (estimate) 4) Motor & drivetrain mounting bolts Motor to hub/frame bolts Function: retain hub motor into dropouts or motor bracket bolts. Likely: M8/M10 bolts with lock washers or nuts; some are Allen head with flange. (estimate) Notes: Ridstar sells motor & controller parts; manuals discuss motor connection but not each bolt spec. Ridstar Official Store+1 Chainring / crank bolts Function: secure chainring to crank spider; crankarm bolts to spindle. Likely: chainring bolts M8 or dedicated chainring bolt set; crank bolt typically 8mm Allen or 14mm socket (depending on crank type). (estimate) Pedal threads Function: pedal-to-crank. Spec: standard pedals: Right = 9/16"-20 UNF; Left = reverse thread. (If Ridstar uses standard pedals — check your pedals). (estimate / standard) 5) Handlebars, controls & accessories Handlebar clamp bolts (bar clamp on stem) Function: clamp handlebars to stem. Likely: 4 × M6×12–20mm socket cap bolts. (estimate) Manual confirms handlebar installation & stem screw tightening. Gleeride Brake lever / shifter clamp bolts Function: clamp levers/shifters to bars. Likely: 1 × M5 or M6 screw per clamp (allen or torx). (estimate) Display / meter mount screws Function: fasten display to mount and mount to handlebar. Likely: small M4–M5 screws (countersunk or pan head). Manual shows screen install. Gleeride 6) Fenders, racks, lights, cargo Fender mounting bolts Function: secure front/rear fender to fork/frame. Likely: M5 or M6 bolts with washers & nuts. Assembly guides show removing/attaching fenders. Gleeride Rear rack bolts (if installed) Function: secure rack to seatstay / dropout mounts. Likely: M6×12–20mm with nuts and spacer washers. (estimate) Headlight / taillight bolts Function: mount lights to fork or seatpost/rack. Likely: small M4–M6 machine screws. Ridstar sells headlight/tail light parts. Ridstar Official Store 7) Seatpost & saddle Seatpost clamp bolt Function: clamps seatpost in frame. Likely: single M6 bolt (on standard clamp) or quick-release lever (if fitted). (estimate) Saddle rail clamp bolts Function: clamp saddle to seatpost head. Likely: 2 × M6 hex bolts. (estimate) 8) Electrical covers, controller & enclosure Controller / junction box cover screws Function: secure controller box or junction plate inside battery compartment. Likely: small M4–M5 pan-head screws or self-tapping sheet-metal screws. (estimate) Battery cover / lid screws Function: secure battery cover / access panels. Likely: M5–M6 pan-head screws or torx/self-tap depending on plastic. Manuals reference enclosure access but not screw spec
