RigExpert WTI-1 cavo CAT e Router Wireless Transceiver Interface Bundle
RigExpert WTI-1 BUNDLE !! Wireless Transceiver Interface + Router WiFi Preconfigurato + CAVO per il vostro RTX!!! https://youtu.be/wyIUOqVFxVU Collega il ricetrasmettitore ad Inter net tramite una rete Wi-Fi. Puoi Utilizzare il portatile per operare modi digitali e fonia , CW o da qualsiasi parte del mondo ! RigExpert WTI -1 è un nuovo rivoluzionario dispositivo per interfacciare il ricetrasmettitore al computer in modalità wireless . Esso prevede : Interfaccia audio Transceiver Interfaccia audio analogica è un collegamento con l'uscita audio (connettore altoparlante esterno o uscita di linea) e ingresso audio del transceiver ( connettore del microfono o ingresso di linea ) . L'interfaccia audio consente do operare nei modi digitali , registrazione e riproduzione di voce , così come altre funzioni utili ( come misurare i livelli di un segnale in arrivo) utilizzando un computer . È possibile utilizzare un auricolare tradizionale sul tuo computer per operare modalità fonia. Un drive virtuale per scheda audio è fornito a supportare le modalità digitali operanti . Interfaccia CAT per vari modelli ricetrasmettitore Sistema CAT ( Computer Aided Transceiver ) consente il controllo della frequenza del ricetrasmettitore , le modalità operative e le altre funzioni di software per computer . Normalmente , ricetrasmettitori moderni hanno di serie ( con vari livelli di segnale ) fornendo un'interfaccia CAT . In RigExpert WTI - 1 , porta d'interfaccia CAT è visto come una porta COM da un software . uscita FSK FSK (Frequency Shift Keying ) è un metodo popolare di trasmissione di messaggi digitali oltre la radio utilizzate principalmente in modalità ( RTTY ) radioteletype . La maggior parte dei ricetrasmettitori forniscono funzionalità modulatore FSK per rendere il segnale RTTY stabile e chiaro . ">Una porta COM separata viene assegnato per l'uscita FSK quando si utilizza RigExpert WTI - 1 . ">Funzioni di uscita PTT e CW Ricetrasmettitori forniscono PTT ( Push To Talk) e CW ( Continuous Wave) ingressi keyer per permettere l'impostazione del trasmettitore acceso o spento e il funzionamento CW utilizzando dispositivo esterno (pedale PTT , CW bug o paddle , controllore nodo terminale , o personal computer) . In RigExpert WTI - 1 , uscite PTT e CW sono assegnati alle linee RTS e DTR di una porta COM separata . Inoltre , l'utente può premere il pulsante PTT sullo schermo per attivare la trasmissione . emulazione WinKey Per il funzionamento CW , è possibile utilizzare il software che sia manipola direttamente la linea DTR , o utilizza il protocollo WinKey . Una porta COM viene creata nel sistema per sostenere lo scambio di dati WinKey . General features Transceiver audio interface for operating digital modes, voice recording and playback CAT (Computer Aided Transceiver) system FSK output PTT and CW outputs WinKey emulation Initial configuration: direct connection to a PC USB (Universal Serial Bus) connector USB 1/2/3 compliant Powered from the USB port No USB drivers required Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit) operating system Normal operation: local area network connection 2.4 GHz Wi-Fi network, 802.11 b/g/n Infrastructure mode; a wireless access point or a wireless router is required Open of encrypted networks are supported External power supply (9...15 V DC, max. 0.5 A) is required Windows 2000/XP/2003/Vista/7/8 (32- or 64-bit) operating system on the operator's computer The virtual serial port, the virtual sound card and the controlling software is provided free of charge Remote operation via Internet ADSL or other high-speed Internet connection is required for remote operation Static or dynamic IPV4 Internet addresses are supported at the transceiver side The router should be set up to forward several UDP and TCP ports to the WTI-1 Any reasonably fast Internet connection at the operator side Transceiver connection Single 25-pin connector for transceiver cable Various transceiver models supported Audio interface Insulated from digital nets Maximum input/output amplitude is 1V Input/output samplerate: 8 to 48 kHz True 16-bit DAC/ADC used CAT serial port Baudrate: 300-115200 baud Electrical compatibility: RS-232, CI-V, TTL or inverted-TTL (Yaesu, Icom, Kenwood, Ten-Tec, Elecraft and JRC transceivers) PTT/CW outputs PTT output: open collector and TTL-level CW output: open collector Maximum current is 500 mA FSK output Baudrate: 45-1200 baud Open collector output Dimensions: 12 x 8 x 3 cm Weight: 0.3 kg Cable type Supported transceivers IC-001 Icom IC-707, IC-275, IC-721, IC-725, IC-726, IC-728, IC-729, IC-732, IC-735, IC-736, IC-737, IC-738, IC-756 (all models), IC-761, IC-765, IC-775, IC-781, IC-7851, IC-970, IC-7600, IC-7700, IC-7800, IC-7851 IC-002 Icom IC-703, IC-706 (all models), IC-718, IC-7000 (using DIN-13 ACC socket), IC-7200, IC-7300, IC-7410, IC-7610, IC-9100 IC-003 Icom IC-746 (all models), IC-7400 TS-001S Kenwood TS-570S, TS-570D, TS-590S, TS-2000, TS-2000X, TS-B2000 TS-002 Kenwood TS-850, TS-950 TS-003 Kenwood TS-480HX, TS-480SAT TS-004 Kenwood TS-450, TS-690, TS-140 TS-005 Kenwood TS-870S TS-006S Kenwood TS-990S YS-001 Yaesu FT-100, FT-817, FT-817ND, FT-857, FT-857D, FT-897, FT-897D YS-002S Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D, FT DX 5000MP (using PATCH and AF OUT sockets) YS-003S Yaesu FT-1000, FT-1000D YS-005 Yaesu FT-450, FT-450D, FT-991 YS-006 Yaesu FT-950, FT DX 1200, FT DX 3000 YS-007S Yaesu FT-1000MP, FT-1000MP Mark-V, FT-2000, FT-2000D, FT DX 5000, FT DX 5000D, FT DX 5000MP (using PACKET and AF OUT sockets) YS-009S Yaesu FT DX 9000, FT DX 9000D, FT DX 9000MP (using PACKET and AF OUT sockets) TT-001S Ten-Tec Orion EL-001S Elecraft K3 EL-002 Elecraft KX3 Connect your transceiver to the Internet via a Wi-Fi network. Use your laptop to operate phone, CW or digital modes from anywhere in the world! RigExpert WTI-1 is a revolutionary new device to interface your transceiver to your computer wirelessly. It provides: Transceiver audio interface Analog audio interface is a connection to transceiver audio output (external speaker connector or line output) and transceiver audio input (microphone connector or line input). Audio interface enables operating digital modes, recording and playing voice, as well as other useful functions (such as measuring levels of a signal from the air) by using a computer. You may use a conventional headset on your computer to operate voice modes. A virtual sound card drives is provided to support operating digital modes. CAT interface for various transceiver models CAT (Computer Aided Transceiver) system provides control of transceiver frequency, operating mode and other functions by computer software. Normally, modern transceivers have serial (with various signal levels) link providing CAT interface. In RigExpert WTI-1, CAT interface port is seen as a COM port by computer software. FSK output FSK (Frequency Shift Keying) is a popular method of transmitting digital messages over radio primarily used in radioteletype (RTTY) mode. Most transceivers provide FSK modulator feature to make the RTTY signal stable and clear. A separate COM port is assigned for the FSK output when using RigExpert WTI-1. PTT and CW output functions Transceivers provide PTT (Push To Talk) and CW (Continuous Wave) keyer inputs to allow setting the transmitter on or off and operating CW using external device (PTT pedal, CW bug or paddle, terminal node controller, or personal computer). In RigExpert WTI-1, PTT and CW outputs are assigned to the RTS and DTR lines of a separate COM port. In addition, the user may press the PTT button on the screen to activate transmission. WinKey emulation To operate CW, you may use software which either directly manipulates the DTR line, or uses the WinKey protocol. A separate COM port is created in the system to support the WinKey data exchange.