SDS PART A SDS PART B Healthofmindart epoxy systems are the most advanced on the Australian market. What separates and gives us a point of difference to our competitors, is that we have been makers and we understand what makers want and our products are 100% Australian made and we have the documents to back this up. Keeping manufacturing in Australia is extremely important to us not only because we have some of the most rigorous quality control in the world, but we help keep our economy going. When you buy our formulas not only are you getting the highest possible quality as we are one of 2 actual Australian made products, but you are helping grow our country and maintain its high quality manufacturing standards. Our epoxies are high end formulas designed for long term results. It is extremely important our customers know our products are designed for long term results. ALL epoxy resins contain aromatic rings which cause long term darkening, cheap epoxies will discolour extremely quickly. Our systems have the most “acceptable amounts” of UV stabilisers and absorbers that we can have. HEALTH OF MIND RIVER CAST is a clear casting epoxy deep cast resin system designed for deep casting applications, including river tables, casting, and embedding. RIVER CAST is a low viscosity, low exotherm epoxy deep cast resin with superior air release and minimal shrinkage. River Cast can be poured up to 300mm deep with the right temps. River cast is a premium formula that’s been designed for longevity. Our epoxy systems are designed for long term success. They will not yellow quickly like cheap epoxies. River Cast has been designed to be the most user friendly deep cast resin on the market. Colour: Clear liquid Pot life: ~3 hoursCured time: 48 – 72 hours (volume and temperature dependent)Cure to maximum strength: 7 days Resin Use: Deep Cast Resin Mixed viscosity: Low Viscosity (Water like) Shore D hardness (at 20 Degrees C): 80-85 Colour Stability: Low yellowing (will darken on UV exposure) Usage Advice: For best results, pour at temperatures between 15-20 Degrees C (volume and depth dependent) and below 70% humidity. Like most deep cast resins, air bubbles may form on the surface. Air bubble release is greatly enhanced by use of a heat gun or gas torch. Care should be taken to avoid over heating in one spot – sweep the heat gun continuously across the surface for a few seconds. Please Note: Deep Cast Resins are environment dependant the larger the pour the more attention you need to pay to your environment. Temperature is critical and therefore environment control is highly recommended. For optimal results, do not pour large volumes outside of the recommended temperature and humidity ranges. If you can not pour under ideal conditions, smaller layered pours are recommended. For large pours please contact us for advice and strategy. Once material has cured, it can be sanded or mechanically processed as required. This deep cast resin can be tinted with HEALTH OF MIND pigments to achieve a vibrant finish. Mixing Volume: The cure speed of this product depends greatly upon the volume of product mixed. This product is specifically designed for large volume mixes. Thin casts or applications as a coating will exhibit a longer cure time. Shelf Life: 12mths @ 25 degrees C unopened Max Depth Per Pour: This deep cast resin is a slow speed casting system specifically designed for a low exotherm for deep pours (50-100mm thick in a single pour) however pours from 10-100mm are possible conditions dependant, curing times are based on overall volumes and conditions will fluctuate. Data sheet links available here
Related
Related
Related
Related