RJ45, RJ11 Network Cable Tester

Freesat.ie Verified independent store

→

RJ45 Network Cable Tester Contents Include Cable Tester Master Unit Remote Unit Colour: Grey Inputs / Outputs: RJ11 & RJ45 Takes a 9 Volt Battery (Not Included) Does Not Come With Carry Bag (Video May Show This) Option to Purchase F-Type Satellite & BNC Adapters These Adapters Allow You Test RG6 Satellite Cable & CCTV BNC Cables If Purchased, Uses Pin 1 & 2 on Tester For Testing BNC / Satellite Cables CC 8203200000 0.210kg Y Uses of RJ45 Network Cable Tester This unit is used to test 2 types of cable: Telephone phone cable terminated with RJ11's (4 pins) CAT5 or CAT6 cable terminated with RJ45's (8 pins) It is normally used to check a cable that has been manually terminated Also it can be used to check a cable in a wall Will work with straight through or crossover cables How to Use RJ45 Network Cable Tester Detach the master and remote unit from each other Plug the jack e.g. RJ45 into the master unit Plug the other end of the cable into the remote unit Turn on the master unit by sliding over the switch to either ON = Normal test mode S = Slow automatic mode The tester now checks each of the 8 wires one after the other If wired correctly the sequence on both the master and remote unit will be 1-2-3-4-5-6-7-8 If the cable is wired incorrectly then the sequence on the remote unit will be out of sync 1-2-4-3-5-6-7-8 If there is a short, then no light will come on in the remote unit Show more